Printed on Ender3 in UncleJessy's Gun Metal Silver PLA from Zyltec. 0.15 layer height @ 30mm/s

Hi my first print, Thanks for the file.

Printed with Fillamentum Wizards Voodoo.

eSun PLA+ 0.2mm layer height using support from the buildplate. Turned out really nice.

Painted using technique Kim described here: https://www.instructables.com/id/Creating-and-Painting-an-Ancient-Artifact/ Worked great, thanks Kim!

Finely detailed model! Turned out great on the Elegoo Mars! Only thing I'm unsure of is my paint job...Hhhmmmmmm.....

Satin Violette @3dJake See more Pics on Instagram @printbrothers3d

20h print with 3DJake purple satin PLA on a heavily modded Tevo Michelangelo - 0.3 mm nozzle

Love this skull

Great work! Thank you for the File!

Magnifique

PETG painted black and then little bit of silver. 23h print and 1h painting. Thank you for the model, Kim. I love it!

Large marble eyes

0.12 mm

The skulls ! Thanks for the great model. I did it twice, 1st @ 125% in metalic silk rainbow, 0.15 layer, 30mm/sec, print time = 22h 41m 2nd time, 3D Fillies transparent red, 150% scale, 0.2 layer 50mm/sec, print time = 14h 32m The pink one was to emulate the Belize crystal skull (partly successful :-) )

Printed on cr10's 0.12 layer height Using SUNLU rainbow filament

Printed with Eryone Silk Copper Cura 4.7.0 with stock ender 3 pro settings but with tree supports and 0.1 Tree support collision resolution. Supports remove easily. Alsd tree supports are no longer experimental in 4.7 Cura!

I can't wait to paint it.

First attempt

Thank you for a great model! Printed at 225% in Tecbears copper silk PLA. I wish I could add the video, but not allowed here.

What a super talented Lady you are Kim :) I just love these models, I just bought some more and now I follow you. I have a 3d printing support group with thousands of users, I will post these and see if I can drive some support your way.

Actually printed on FLSUN's new SuperRacer

Alles super geklappt, danke

De mis primeras Impresiones! Amazing!

A nice design and knew I had to print it as soon as I saw it. ABS Like Resin printed on LD002-H, used Chitubox scaled up 108% and added supports first, then hollowed and added drain hole on the flat bottom. Adding auto supports first stopped Chitubox adding internal supports to the skull. The print was printed at 45 degrees with the face towards the platform. Finished with a black base coat, and then gold paint dry brushed over surface.

Scaled up and printed with dual colour PLA.