Two Fugitive Predator Bio. Both printed on the Cr-10v2 . Printed with Black Silk filament. Both assembled with CA glue, sanded down and primed with high build primer. Sanded to a smooth finish. Then base coated in shiny black Rustoleum paint. Then airbrushed with Createx quicksilver and a combination of pearlized black and detail black. Gold trim was airbrushed with Folkart Gold trim. The bigger mask was clear coated with 2k clear and the smaller mask was coat with a matte finish. I added electronics for that Predator feel and added red eye visor that light up. These were actually made for Brian Prince the actor that played in the Movie The Predator. Hope you guys enjoy !!!

it is sculls on rock but i really need this to be a win for me because im running low on resin and i cant buy it and my printer is about to break so pls let me win pls

Majestic tree classical version

Its my first paint I've done with a 3d print so hope yall enjoy it!

Majestic Trees surrounded by other surreal life forms

Majestic tree white trunk version

Majestic tree boue version

Girlfriend wanted a neon green tree with a purple trunk

Bone abomination Monster

Giant Scorpion

Giant Worm add-on (single) painted as a spawn of the Great White Worm. Its glistening form rises from the jungle floor.

Majestic tree, FDM printed

Printed and Painted broken scorpion

Majestic Enchanted Tree with Fungi

Bones Abomination with Supernatural Glow (LED Lights)

Went with fantasy Fall colors with this lovely tree.

A very Majestic truffula tree. What could be hiding within?

A 3D PRINTED SHOE KEYCHAIN

Pyramid Head in my dreams

One day painting try

A Majestic Tree found magic flow under rock

Majestic Enchanted Tree

Voodoo Rock

The bone abomination emerges once more from the entrance to the ruins, The glow of screaming, corrupted souls presages her arrival. This piece was a challenge. At first glance, its a jumble of bones and spikes, Then you notice the chains. Then you see the hex bolts at the ends of the chains, and that those bolts are driven into either giant bones or pieces of wood that act like, well, like a skeleton upon which the bones of the fallen are hung. I chose wood to give a greater variety of color. Then, of course, there are the spikes, loads of skulls, taunt skin, and what I think are some bulbous blood vessels. More than once I'd be doing a highlight and see a piece of wood (I think) that i missed, and have to back up several stages. It was also a lesson in mistakes. I experimented with a variation of zenithal priming. Rather than black then white, I tried brown and skeleton bone. That.... didn't really work, and I spent a lot of time trying to fix that. Another mistake was the flesh. Where I ultimately went for a more classic flesh tone wash on the taught skin, I think I should have stuck to the bluing undercoat for de-oxygenated blood (veins). The brownish flesh wash is just too similar to the bone and its wash. The green glow was an experiment. I'm still trying to get that sort of an effect down. I wanted an eerie color to offset the otherwise blended beiges and browns. This being a PLA print, there was stringing, lots of stringing. I removed most, but there were tiny strands that I just couldn't quite get, so I tried to highlight them as sinew. Similarly, there were little blobs on the talons, which is why our girl got her nails painted, to represent gobbets of flesh not yet absorbed. The archway? Its a pretty simple piece of terrain to paint. I went with blue granite to give color and contrast to the overall piece in a way that stone grey would not. Additional scatter in the last image is from Fantastic Plants & Rocks vol 1.

Most of my campaigns take place in Northern settings, so I imagined this model as an Ice Worm. Printed at 80% size because my printer is small.

My new Tree

Bone Abomination Add-on

This is Sally. Sally was once your average, fun loving, clam eating amphioctopus marginatus (or coconut octopus for the uninitiated). One day, someone dropped a barrel of green goo on Sally's home. Now look at her: not so average, not so fun loving, and now a voracious eater of everything. Mostly though, Sally is now sad. No one will play with her anymore, but she did find her previous friends quite tasty.

Majestic Tree

Pirates Palm Tree

Transition through the seasons.

Portal to the Feywild.

Cherry blossom in spring.

Autumn colors.

Four Corners of the Feywild.

Summer Vibes

Snow covered tundra

Lively colored flowers and mushrooms decorate the Underdark; but what if there was a small tree that could survive deep under the surface?

Majestic Trees with Dark Trunk

Majestic Tree with Amethyst Leaves

I loved the gnarled and twisted trunks of these sculpts. I decided to add some Citadel skulls and used bright colors to add a bit of whimsy to this necrotic grove. The colorful display attracts, but only when it is already too late do adventurers realize their peril. Fantastic Print & Paint Competition

Giant Spider on base

Two sets of four trees that illustrate how the terrain can represent both fantasy set pieces and traditional terrain of multiple seasons.

Giant Worm, FDM printed

My entry of the Majestic Tree... very nice sculpt!!!! So I chose to make one in Amethyst peacock/mermaid colors and a burning gold/ phoenix.

My entry of the Majestic Tree... very nice sculpt!!!! So I chose to make one in burning gold/ phoenix and Amethyst peacock/mermaid colors.

Giant Spider add-on

When Gargamel turned the last smurf into gold, the forest lost its summer. The trees fell into a perpetual state of autumnal decay. Few who have risked exploring the once vibrant mystical forest return. Those who have report seeing a scraggly orange cat shortly before everything goes wrong.

Classic purple worm. Very menacing!

Giant Black Widow in the caves. Personally my worst nightmare.

So wanted to make a pretty standard tree, while including some slight blue hue, coming from the core - insinuating some magical properties within the tree. Didn't entirely manage to get it right, but happy since this is my first approach at painting the majestic trees :) .

The Majestic Tree Forest! As soon as I saw these sculpts I knew I had to do a group of them in magical colours that would be perfect for a Feywild/Fairie forest. The super vibrant colours were achieved using layers of up to 5 shades on each tree's foliage, all starting with a deep purple undertone so they matched and then building up in their respective tones. The knots on the wood have a glowing eminence to them that I think is really going to suck in my Dungeons and Dragons party when they see them. I still have to decide if I'm going to make them a trap or treasure, we will see!

"The exploration team was in awe of the unexpected colors and strange glowing bark of the flora on the newly discovered planet, Vadrolla." Printed at regular size on an Anycubic Photon using Siraya Tech Fast Smokey Black resin. Painted with Vallejo acrylics.

This is Steve, Steve doesn't get many friends because they swim away before he can show them how good he is at hugging. Steve is very good at hugging.

Autumn style majestic tree ;) .

Enchanted Obelisk Tried to get that still slightly shiny from the rain and water-stained look to the stone with yellow flowers on strong green vines to really contrast with the darker grubby vibes of everything else.

Jungle Darkness Set

Majestic Tree by Astounding

Swamp things! Just enjoying a brew together in the swamp, as they do

Stingy boy!

Bones Abomination Add On Mausoleum 2

Terrain made on Ender 3 Pro, scorpions and skulls made on Elegoo Saturn.

Majestic Tree

Bill, Ben and their scorpion den. Added some uv reactive paint to get the gut gloop to pop out when shot under a blacklight, much like actual Scorpions. Sofubi inspired colour fade alternates on tail and fangs, with some regency gold liquid metal acrylic for some bling. Added a small led light under the temple to uplight the scorpion relief. Lots of fun to do :) Printed on a Voxelab Proxima in standard grey resin

StarCraft2 Space Marine in red

Truffula tree...lorax for scale

Fantastic Print & Paint Competition

Majestic trees

Joker

Jungle Mother

The tree of dreams, with glittering stars in the foliage and radiating magic, is a popular destination for magic users and normal people alike. It is said that it serves as a direct connection to the goddess of starts herself.

Alien planet aesthetic. Slight metallic sheen on the leaves.

Majestic Enchanted Tree 3, painted with purple foliage.

Swamp Tree

The Majestic Tree from Print your Monster campaign. I wanted to obtain a warm autumn atmosphere playing with hot lights on the leaves and on the grass. I applies some white and yellow refletions here and there to obtain dynamism on the scene . I also wanted to keep the trunk light and cold to have some contrast, so white colour and moss formations.

The Every Season Tree

From the Fantastic Plants & Rocks vol.2, Majestic Tree. I figured I would make a tree on fire, attempt some OSL and be a bit of a special snowflake since I figured we couldn't modify the print. My inspiration was the burning of Teldressel from World of Warcraft.

The left tree has a little printing failure, not sure where the problem was, but it ist still a good, usefull free and i dont have that much resin, to not use him for our tabletop games.

Mystical Cherry Tree

Enchanted Tree made to look like it’s a multicolored Magic tree. Then the spider add on with terrain. Mother protecting her eggs and nest.

I call it the Cosmic Tree. It floats endlessly within the vacuum of space. To create the light effect I have installed 2 LEDs inside the tree.

Agamot´s Stones, Majestic Enchanted Trees, Martian Cliffs, Necron Stalagmites, Underwater Stone Cave, War of the Worlds Stones, Giant Pumpkins on boards from Folklore: The Affliction, with miniatures from Folklore, Middara, and Sine Tempore Printer was the ELEGOO Mars 2 Pro, couldn´t select that, so I selected ELEGOO Mars Pro

The Fancy Badger Inn is full of mirth and music and a few shady characters sitting in the back corner, eyeing the nobles at the long table. You and your fellow party members rest here at the inn after defeating a tribe of kobolds. The tough adventure leaves you famished and you await the return of the serving girl with your evening meal. She approaches, but suddenly there are vibrations in the floor boards. You realize that the Inn patrons have quieted and the sound you now hear is a rumbling from below. With a crack of splintering wood something monstrous bursts through the Inn floor... Roll Initiative.

Iced Enchanted Tree

A lonely tree in a cavern, fighting for a bit of light.

The Blood Tree

The Lantern Tree.

Mallorn tree

"Moonlight Shadows" Fast and simple paint just to play with some lights! Summer scene with a touch of fireflies!

IN the moonlight, this nightshade tree glimmers in purple, blue and pearl hues. Light angle changes the color of the tree from nightshade blue to deep purple so there are some doubles to show this affect. Printed on a Peopoly Phenom L Submit by Ken Illig aka DaddioIs

Fall brings the vibrance of color throughout the forest! Ten different colors were used to create this leaf by leaf recreation of the warmness of this season. Printed on a Peopoly Phenom L

Majestic Tree with glowbug clusters!

No bridge is safe in this swamp! Swamp monster attacks any who tries to pass his deadly trap. I wanted to try to get some variance in the vines with different greens, making the thin creeping vines a bit more rich with the massive rolling vines a more washed out swampy sickly green. I wanted the mouth and teeth to be the focal point and also to have a thorny plantlike look so I went for a sickly white to red glaze.

Small gathering of Majestic Trees!

Magma Worm

the Underwater Creature... terror of all depths, from the Coral Garden to the deepest and darkest Abyss... (Creature-parts printed in resin, the coral parts PLA)

Giant Spider add on from the Fantastic Print your Monsters with a Fiery flair.

Magical little tree

Pandora tree

As you enter the tomb, you can hear a strange clattering sound echoing through the empty halls. Your eyes slowly adjust to the darkness you when suddenly realize the source of the sound. It is a massive albino scorpion! You ready your weapon as the clattering sounds suddenly multiply and grow louder and the sudden dread falls over you, this tomb is not empty. I love the models for this KS and thought I would try my hand at painting the awesome scorpion model. Thank you PrintYourMonsters for your great scuplts.

Coming from an arachnophobe, these spiders look terrifying! I can't imagine the dread of stumbling onto these spiders in the desert at night. Loved the look of these spiders and can't wait to use them in a campaign soon! Printed on a Phrozen Sonic mini 4k.

Talk about lush! If only I could grow trees like this for my place! Looking forward to all the new terrain for my campaigns. Printed on a Phrozen sonic mini 4k

Forest of otherworldly mystical trees, printed 2 of each of the 5 designs and painted all to be unique from each other.

2 spiders with the temple and webs.

Purple Worm

Metallic Majestic Tree

This is a diorama I created from the add ons from the Fantastic Plants and Rocks campaign. The cliff face is made up of the rock in the Jungle Mother pack rotated and scaled to various sizes. The spider and entrance is from the spider pack. The columns and the floor are from the scorpion pack. The plants and bone piles are from the core pack.

Jungle Darkness Mother and Her Mutant Spider Babies in a small Terrarium style Diorama. This is an amazing sculpt, and I had a ton fun painting her.

Tree, painted in acrylic, printed in resin (Elegoo Grey/Siraya Grey)

The Deadly Blue Ringed Underwater Mutant!

During the summer solstice in the Eastern woods, the canopy glimmers as sunbeams dance across the leaves of these Golden Junipers. Near the center of the desert, where sand has come to fill the ancient valleys vast tunneling worms lay in wait, feeling for vibrations in the sand with their teeth. They greedily shred anything that walks too near, always hunting for their next source of precious hydration. These fortunate specimen have recently fed, maws slick with moist blood.

First Tree Attempt

Second Tree attempt done as part of a exercise to recreate a magic tcg card.

Experimental tree painting scheme. Meant to look like a Starry Sky

Third three attempt, went for a Cherry Blossom vibe.

Final Tree I painted for the competition, tried to really go all out on the different colors.

Our Majestic Tree and Gross Worm

Giant Worm

Swamp Monster

Feywild Tree - actually printed on the Phrozen Sonic Mighty 4k, like my previous entry of the swamp monster.

Miniature fairy/pixie treehouses! A hanging longhouse and scenic pavilion. Perfect to relax or plan some fey mischief. Printed on a Prusa MK3S with PLA. Houses crafted from wood. Done with a broken wrist (lack of dominant thumb).

Play with colors and lights

Black Sun rising over the Nile

The flaming oak Showing translucency in a picture is reeaally haaard. It looks a lot nicer in person, but I gave it my best :)

Sand Worm Printed and painted for the Fantastic Print & Paint Competition.

Majestic Tree Printed and painted for the Fantastic Print & Paint Competition.

The Four Seasons Tree: Clockwise from Top Left: Spring, Summer, Fall, Winter.

The Winter Wyrm

The Jungle Darkness Mother

I found this crawling in my office.

Majestic Tree by Treebeard

More Trees

Magical runestones with LEDs. Printed on modified Ender 3 (except large center stone, which was printed on a Prusa MK3S).

Majestic Tree Glow-in-the-Dark by Treebeard

Great tree for Print your monsters contest plants and rocks volume 2. With a mystical elemental theme.

Jungle Darkness Mother by PrintYourMonsters, printed on Anycubic Photon Mono X