Figure - Roman Praetorian Guard 1st-2nd C. A.D. in action
$8.99 Figure - Roman Praetorian Guard 1st-2nd C. A.D. in action
3D
Published 2021-01-15T19:16:19+00:00
S.P.Q.R
This is a Roman Praetorian Guard 1st-2nd C. A.D. in action.
The Praetorian guards were elite soldiers of the Imperial Roman Army, that were serving as personal bodyguards and intelligence for Roman Emperors or for high ranking officials, during the Roman Republic and Roman Empire periods.
Print it Paint it and create your story!
Remember to tag us on Instagram or post your creation in our Discord or Facebook Group.
Linktree: https://linktr.ee/Minormous
Discord: https://discord.gg/pNNXQFkjGG
Facebook Group: https://www.facebook.com/groups/minormous
Product Details:
This figure is created to be as historically accurate as possible with realistic proportions.
This model comes fully and professionally Pre-Supported!
It comes in parts for easier printing and will require assembly.
Note: Minor post-processing may be needed for a perfect fit, depending on the resin and shrinkage percentage.
Default Scale:
Figures:1:24
Busts: 1:10
Scale Guide:
Use these percentages in your slicer to adjust the model to your preferred scale:
For Figures:
1:15 scale = 160%
1:20 scale = 120%
1:24 scale = 100% - Default
1:32 scale = 73.33%
1:56 scale = 42.7%
For Busts:
1:10 scale = 100% - Default
1:12 scale = 83.33%
1:13 scale = 76.92%
FAQ
Q: Can I change the scale of the model for more heroic proportions?
A: The proportions will stay the same, but the model will appear larger, giving it a more heroic look. The model is already slightly on the heroic side.
Q: My model is smaller when printed. Why?
A: This is likely due to resin shrinkage. Make sure to scale the model up according to your resin's shrinkage percentage. For example, if the resin shrinks 5%, scale all parts to 105% in your slicer.
Q: My model appears small when importing into the slicer. How do I fix that?
A: Scale the model up 10 times (or to 1000%) and it should be at the correct default scale.
Q: My model appears red when importing into the slicer and shows topology issues. Why?
A: This is most likely a slicer glitch, as we have test-printed our models multiple times with no issues. Join us on Discord to share your experiences.
| Date published | 15/01/2021 |
| Precio | $8.99 |
| Sin apoyo | YES |
Very good models! Will definitely be getting the others in the future.