Flexi Factory Troll
$2.95 Flexi Factory Troll
Published 2024-05-27T19:32:15+00:00
ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.
To legally sell PRINTED models, monthly ACTIVE membership and a Seller Authorization form is required through one of two available platforms below:
https://linktr.ee/flexifactory
Please help support the creative work of each 3D artist and NEVER share or sell a digital file.
With so many great trolls out there, from Frozen to the Trolls movie... it can be a challenge to make something unique and super fun. Challenge accepted. 😉
This one was a blast to create. Like with all of my characters I work hard to give them personality, and I couldn't be happier with that toothy expression.
I tested between 150% and 30% for this model to see how small it can go, stand and still hold the club...and it works!!! Of course the smaller you go, the weaker the links and club can become.
I hope you like it as much as I enjoyed creating it. -Dan
Print tips and Info:
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- Consider mirroring the model in the slicer (and club) for a fun alternative print. That is how i printed the "twins" above.
- I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.
- Gradient PLA works well with this Print-in-place model
- 1st photo - 100% 3m file printed in: Bambulab Matte Sakura Pink, Cookiecad Mint Chip, and eSUN Brown PLA+
- 1st Photo - Hand painted 125% by my talented wife and printed in: iSANMATE PINK/Candy Green and painted with Vallejo Acrylic Paints
- 2nd photo - 80% mirrored printed in: Paramount 3D Medusa Stone Gray, Amolen Red/Gold, and I keep these two for my whites and blacks on hand at all times... Bambulab White Marble and Bambulab Onyx Black Sparkle
- 3rd photo - 70% printed on the Bambulab A1 Mini: Creality PLA+ Rainbow (I printed each one separately to go through the colors)
Print tips and Info:
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- Consider mirroring the model in the slicer (and club) for a fun alternative print. That is how i printed the "twins" above.
- I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.
- Gradient PLA works well with this Print-in-place model
- 1st photo - 100% 3m file printed in: Bambulab Matte Sakura Pink, Cookiecad Mint Chip, and eSUN Brown PLA+
- 1st Photo - Hand painted 125% by my talented wife and printed in: iSANMATE PINK/Candy Green and painted with Vallejo Acrylic Paints
- 2nd photo - 80% mirrored printed in: Paramount 3D Medusa Stone Gray, Amolen Red/Gold, and I keep these two for my whites and blacks on hand at all times... Bambulab White Marble and Bambulab Onyx Black Sparkle
- 3rd photo - 70% printed on the Bambulab A1 Mini: Creality PLA+ Rainbow (I printed each one separately to go through the colors)
| Date published | 27/05/2024 |
| Precio | $2.95 |
| Sin apoyo | YES |
Thanks for the model Dan but im not sure why the back of the hair went like it did i printed on IS setting on my new Prusa MK4 .. I used Cotton White Pla by Polymaker