Flexi Hedgehog Print In Place
$3.94 Flexi Hedgehog Print In Place
Published 2024-08-01T07:52:02+00:00
Flexi Hedgehog is a print-in-place design that comes in various versions, including a regular design, a keychain, and a magnet, so you can choose according to your preference.
I've included two pre-painted versions: one with the painted tips on the quills which is for those who don't care about the print time 😎
And another one without painted tips for those picky about print time and this should save you some layer-switching time. 🥰
So go ahead and pick your favorite! 😉
As for the keychains, I'd suggest printing them at 80% scale because, let's be honest, 100% is more like a pocket anchor than a keychain.
Please excuse the stringing on the quills 😅 I forgot to remove them before taking the photographs.
Below are the recommended settings:
No need for supports!
Aim for a layer height between 0.16mm to 0.18mm
Stick to 2 walls
Bottom layers: 4
Top layers: 6
Shoot for a 15% infill (Gyroid or Cross Hatch)
Downscale from 100% to 80%
Precision settings: Slice gap closing radius - 0.008, Resolution - 0.008 (This helps avoid weird artifacts near the eyeball while printing in multicolor)
| Date published | 01/08/2024 |
| Precio | $3.94 |
| Sin apoyo | YES |