Gothic Ruins : Competitive buildings compatible with Nexus Pariah
$15.00 Gothic Ruins : Competitive buildings compatible with Nexus Pariah
3D
Published 2025-04-30T08:14:04+00:00
An amazing set of grimdark gothic ruins from the Gothic Sector Templaris Part 2 campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-templaris-part-2-3354).
Buildings are compatible with the Nexus Pariah Layout for the GW companion. It's not compatible with WTC terrain. First floor of buildings are available with open windows and filled windows
Buildings can be printed in multicolor with FDM printer that allow this feature. 3MF files already configured for multicolor print supplied.
There are 27 parts that allow you to build
-1x L-shaped 2 story building
-4x L-shaped 1 story buildings
-2x U-shaped 1 story buildings
-6x ruins
Every parts can be printed on FDM printer (20x20 cm or higher) and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : Pre-supported version available.
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
| Date published | 30/04/2025 |
| Precio | $15.00 |
| Sin apoyo | YES |
Alignment peoblem with the hole on L_Shape_1_Floor1 in the center pillar