Gothic Ruins : Sainte Anne Tower & Repentum
$10.00 Gothic Ruins : Sainte Anne Tower & Repentum
3D
Published 2025-05-27T11:25:19+00:00
An amazing set of grimdark gothic ruins from the Gothic Sector Templaris Part 2 campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-templaris-part-2-3354).
Buildings can be printed in multicolor with FDM printer that allow this feature. 3MF files already configured for multicolor print supplied.
There are 19 parts that allow you to build
-Multiple variation of an octogoan tower (from 1 story to 4 story)
-1x 2 story building
-2x 1 story building
-2x ruins
Every parts can be printed on FDM printer (20x20 cm or higher) and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : Pre-supported version available.
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
| Date published | 27/05/2025 |
| Precio | $10.00 |
bambu lab suggests adding supports but i'm sure you made made it to not need them. printing the first one with auto tree to test but just want to make sure I don't need to in the future.