Grimdark Industrial Ruins Set #5 - Storm in the Hive
$10.00 Grimdark Industrial Ruins Set #5 - Storm in the Hive
3D
Published 2024-11-08T08:25:52+00:00
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis, campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 ) that can be used as proxy for the Kill Team Hivestorm campaign
There is 19 parts that allow you to build
-1x two storey stronghold
-1x one story stronghold
-2x one story large ruins
-1x small ruins
Update 31/03/2026 :
-Large Ruin A and B : I increased the height of the floor of the Large Ruin A and B to 2 mm and redraw the destruction line of walls (side and top) and floor to better match the official kit
-Small Ruin A and B : redraw the destruction line of walls (side and top)
-Stronghold A and B : I changed the global lenght and width to few mm (a bit more for A a bit less for B) and redraw the destruction line of walls (side and top) and floorThere is no need to reprint the set if you play W40k with it. It's only if you play KT and more especially if you do competitive KT.
Every parts can be printed on FDM printer (18x18 cm or higher) and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : Pre-supported version available.
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls or magnetized (round 5mmx2mm magnet) but gluying different floor of a building is optionnal.
| Date published | 08/11/2024 |
| Precio | $10.00 |
Très bon set. Aucun problème avec une imprimante FDM.