Infinity Laptop Arc
Infinity Laptop Arc
3D
Published 2017-07-24T16:39:29+00:00
The Infinity Laptop Arc is part of my Infinity Series of office/desk accessories (Headphone Stand and Phone Stand are the other 2 designs). This design is intended to be simple and elegant. Perfect for those using an external monitor as it saves space on your desk and allowing for access to ports and charger.
Current variations include:
Current M series Macbook Pro (14 and 16 inch)
2012 Macbook Pro
2014 Macbook Pro
2016/2017 Macbook Pro (variants with and without shell.
Razer Blade Stealth.
If you would like a custom width, please contact me and I will create you a custom file. If you are unsure or are using a case please use some software tool to measure the width before printing.
Like it? Leave a comment and a picture of your print!
Recommended Print Settings: Filament choice is not important (PLA, ABS, HIPS, PETG etc all options, however, I would avoid material that is prone to warping or shrinking like ABS). Use recommended temperature settings for filament chosen (~210 / 70 PLA, ~240 / 110 ABS). Support required- laptop slot and overhangs. Infill - 50-70% (stand is lightweight so extra infill helps increase weight) Layer Height - 0.1 - 0.3mm Speed - 50-80 mm/s or whatever you are comfortable with. Orientation - this is a very tricky print, I have had success on it's side (your slicer should load in this position) as well as upside down.Due to the size you may need to print it at roughly 45 degree angle. Material usage - 227g / 33.34m build and support material. If you have the ability to use special support material such as PVA that would be best to avoid bad surface quality.
| Date published | 24/07/2017 |
| Dimensiones | 87x102x305 |
| Tecnología | FDM |