KS2AZT13 - Aztlan Sacrificial Ziggurat
$5.00 KS2AZT13 - Aztlan Sacrificial Ziggurat
3D
Published 2021-05-05T13:34:47+00:00
Aztlan was our first original set that got developed into a full series. It was Will's baby to start, but almost all the Aether Staff have since contributed. It is also our largest tile set series, with well over 1000 models.
This latest expansion, Sacrificial Ziggurat, started off as a small 4 piece set from Nasos for making simple, small ziggurats. It has since expanded into a massive 20+ tile-set of 4x4 sized models for creating massive, expansive Ziggurats.
We hope you enjoy this latest release from Aztlan.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Supports may help for printing Top 2
| Date published | 05/05/2021 |
| Precio | $5.00 |
| Sin apoyo | YES |
Nasos Maloudis has designed this sacrificial beauty! Lovingly painted by Richard Sunnucks @rsunnucks