KS3AET04 - Aethertowne Interior Furnishings
$5.00 KS3AET04 - Aethertowne Interior Furnishings
3D
Published 2021-01-30T09:14:04+00:00
This set, Interior Furniture, was one that came together organically from the construction of the other sets. These contemporary designs fit a multitude of eras and feature a style with good taste above all.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/01/2021 |
| Precio | $5.00 |
| Sin apoyo | YES |
The room is built from the Dark Manor set, and the padded benches, rug, and lounge are all from this interior furnishing set. The pieces do not take long to print dependent of course on how many you make, what % infill you use. I used a detailed setting for my prints.