KS5EGG01 – Designs of Madness
KS5EGG01 – Designs of Madness
3D
Published 2023-04-15T05:28:06+00:00
Included in this set you will find all the miniatures, ornaments, chibi figurines, siege weapons, and wargaming sized ships from the Eggnog & Brains Kickstarter. Most of these miniatures are designed for resin printer so you will need to use supports for printing. This set, and the other sets in this campaign, are 100% free. Why? Because we can. Because 2021 was the hardest year yet for our brothers and sisters on this planet Earth. Because tabletop gaming is the highest form of group therapy and we want help. Because Carl and his family got the support they needed. Because we are so thankful for the opportunity to be a part of your games.
Thank you to all our fans for making this campaign happen.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 15/04/2023 |
| Sin apoyo | YES |
I printed & painted this for a friend for Christmas, :-)