Mask Display Stand
32,839
visitas
4,426
descargas
63
colecciones
3 comentarios
Cargando comentarios... 
Mask Display Stand
3D
Published 2014-10-18T01:08:08+00:00
849
3
Add to Collection
Descripción
This is just a nice stand for your mask. I initially made this one when I needed a stand for my Guy Fawkes (Anonymous) mask. It was designed to be used with different mask sizes and can be printed in parts or full scale. It will be a good way to showcase your printed mask.
Check out my Predator mask and a whole bunch of printable masks here.
Detalles de impresión
Print Details Dimensions: 84mm(H) x 54mm(W) x 104mm(D) Printing Time: 180 minutes Print Speed: 90mm/sec Material: PLA filament Filament quantity: 7174 mm /17.3 cm3 Layer height: 0.2mm (200 microns) 3 perimeters 20% infill
Información técnica
| Date published | 18/10/2014 |
| ¿Cuándo tiempo lleva? | 180 - 180 minutos |
| Dimensiones | 84mm(H) x 54mm(W) x 104mm(D) |
Más información
Archivos
The bottom did not slice flat, so I lowered the STL 1.5mm into the bed to create a flat finish. Thanks for the STL. :)