Mjolnir (Thor's Hammer)
Mjolnir (Thor's Hammer)
3D
Published 2017-12-04T12:16:42+00:00
I know so many people have already made this, but I just really wanted to create it myself and print it out on my CR-10 knowing I could print the whole handle in one print. I printed the hammer head on my work 3D Printer, Makergear M2 because it's just WAY faster. Enjoy!
I added the .STL of the handle split in half for printers with a smaller height then the CR-10. I also put a hold in the middle for a Wooden dowel (3/4" diameter and roughly 10.6" long) to glue in and hopefully make it more stable. Let me know what you think!
Printer:
Creality CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.35 - 0.40mm
Infill:
20% - 50%
Notes:
Def needs support on the handle, and I made the support "Max Overhang Angle" either 60-70 degrees for the hammer head. (Simplify3D)
| Date published | 04/12/2017 |
| Tecnología | FDM |
| Complejidad | pages.object.complexityeasy |
Hammer printed at 0.32 and 90 speed and 10% infill with supports only at the perimeter. The handle was printed at 0.2 and 60 speed, also 10% infill. Awesome model