Moon Wolf Curio Box
$5.99 Moon Wolf Curio Box
3D
Published 2026-01-05T22:28:08+00:00
By downloading this item, you agree:
Not to distribute the files
Not to sell prints of this item.
You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items.
🔗MMF: bit.ly/FatesEndTribe
🔗PATREON: bit.ly/FatesEndPatreon
While you're at it, check out Furhaven: bit.ly/FurhavenGame
════════════════════════════════════
🐺 Moon Wolf Curio Box
Nestled beneath the northern lights, the Moon Wolf Curio Box channels the silent strength of the wild. This hexagonal treasure box features ornate woodcarving and filigree, crowned by a noble wolf in profile against a pine-dotted moonlit backdrop. Raised on sturdy feet, this box is perfect for holding jewelry, dice, keepsakes—or secrets best left under starlight.
Includes two versions: a support-free model and a version that may require light supports depending on your printer setup.
════════════════════════════════════
EASY TO PRINT! Our files are designed to be 3D Printed easily without supports! (Supports are the WORST!) Due to the nature of miniatures, our miniatures & ornaments are pre-supported if needed!
Most FatesEnd files are designed to fit on a 7"x7"x7" print bed area or larger! All dice towers are designed to work with standard 20mm dice at 100% scale. (Dice set/tower scales are determined by the size of the D20 in the set.) If you need to scale the files, you may use the Dice Scale Chart found here: fatesend.net/resources
Our models are designed to be support-free for easy FDM printing—no supports needed!
- Layer Height: 0.2mm for standard prints, 0.12mm for finer details (enable Z-hop for delicate prints)
- Wall Loops: 3-4 for strength and durability
- Infill: 6-8% using gyroid pattern for optimal strength and efficiency
- Supports: Not needed! Our models are crafted for hassle-free printing
- Bed Adhesion: A well-leveled bed is usually enough, but a brim can help for extra stability
If you run into any issues or need advice, feel free to reach out! We love seeing your prints—share them with us using #FatesEnd!
| Date published | 05/01/2026 |
| Precio | $5.99 |
| Dimensiones | 172mm x 173mm x 44mm |
| Sin apoyo | YES |
Gray PLA, 0.8 layer on 0.4 nozzle, 0.05 adaptive radius setting 1.