Mushroomhouse drinkcoaster (pair)
Mushroomhouse drinkcoaster (pair)
3D
Published 2020-06-14T08:50:16+00:00
Note! There is an update; i have attached three files for multi-color printing. Check the results out on this page: https://www.myminifactory.com/prints/3d-print-26542 (Made by: Todd@Starlabs3D.com)
This download contains two drinkcoasters, a negative and positive one. If you print it for a drinkcoaster, i would print the negative one. Cause that one provides more stability for your glass/cup. Use these coasters to place your favourite drink. If you have printed it, don't hesitate to show of your skills and upload a picture.
More 3D models? Check out my growing collection: https://raimonvibe.eu/models/ 🌐✨
Explore my world of 3D prints, coding, faith, and creativity 🌱✨ at https://raimonvibe.eu/ 🔗🔥
Made with love by:
Raimon
I have printed this model with Fillamentum light ivory PLA. I used 0.25mm layer height and, 18% infill. I used a 0.4mm nozzle with my extruder at 210 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim. Don't hesitate to use your own configuration....no worries!
Design process
I picked a logo from my browser and have put it in svg format in inktscape. Opened the svg file in blender and made it a 3D object. In meshmixer i have repaired the file; and erased some aspects. In meshmixer i have also added a coaster. Than i have merged the coaster with the picture after scaling the picture. Saved it as a STL file and sliced it for printing. Cause the model has still some issues even after repairing it in meshmixer; i have decided to export it into Netfabb Online Service. This is an app i discovered recently after using MakePrintable. Cause MakePrintable in my opion only gives us 3 procedures of fixing an STL file and, with Netfabb Online Service the frequency of STL fix procedures is unlimited, my choice was clear. It worked well for me and i could slice the model without any problems.
If you would like to know how i design a 2D picture (google) into a 3D model.
Use this link:
https://www.youtube.com/watch?v=g6cmClwLhz8 (video is under 6 min.)
2D to 3D in Blender
use this link to download blender for free: https://www.blender.org/download/
use this link to download inkscape for free: https://inkscape.org/nl/download/
| Date published | 14/06/2020 |
| ¿Cuándo tiempo lleva? | 119 - 120 minutos |
| Cantidad de filamento | ~ 23 gram |
| Dimensiones | 100*100*5mm |
| Sin apoyo | YES |
Awesome design!