Nightingale Bow - Skyrim - Office Warfare

3D File Logo  3D

Published 2015-02-17T18:41:49+00:00

    Nightingale Bow - Skyrim - Office Warfare image
    Nightingale Bow - Skyrim - Office Warfare image
    Nightingale Bow - Skyrim - Office Warfare image
    Nightingale Bow - Skyrim - Office Warfare image
    Nightingale Bow - Skyrim - Office Warfare image
Loader
3D
  1. Accesorios y trajes >
  2. Cosplay Accessories |
  3. Videojuegos>
  4. Bethesda
Exclusivo MMF
35,718 visitas 2,964 descargas
53 colecciones
Imágenes de la comunidad Añadir tu imágen
Loader
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
  • Picture of print of Nightingale Bow - Skyrim - Office Warfare
19 comentarios
    Cargando comentarios...

    Nightingale Bow - Skyrim - Office Warfare

    3D File Logo  3D

    Published 2015-02-17T18:41:49+00:00

    Marco Morata

    @planet3dprinting

    59 objetos

    716 Seguidores
    538 19 Add to Collection
    Descripción

    The Nightingale Bow is a unique archery weapon found in Skyrim. The bow is originally owned by Karliah, but it can be obtained during the Thieves Guild questline. Because the bow is leveled, the magnitude of the enchantments, the base strength and value of the bow are based on character level; meaning that with every level the Dragonborn has advanced when the bow is obtained, the bow does more damage, weighs more, and is worth more.

     

    I have tried to create a fully operational bow that can fire fake arrows for a bit of fun. 

    Print out 2 and challenge friends to a dual!

    Mostrar más Mostrar menos
    Licencia
    Detalles de impresión

    I have made this bow in lots of separate parts so that you do not lose detail as well as not needing glue. For the sake of making sure its as strong as possible, I have glued the two halves together but not the joints as there was no need. Printed at 100% size, I used 0.2mm layer height and 8% infill. It took 3,360 minutes and 578 grams of filament.

    Información técnica
    Date published 17/02/2015
    ¿Cuándo tiempo lleva? 3300 - 3500 minutos
    Cantidad de filamento 578g
    Tecnología FDM
    Complejidad pages.object.complexityveryeasy
    Más información
    Archivos
    Ni Repaired Cut 1 Cut 1 Cut 1.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 1 Cut 1 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 1 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 2 Cut 1 Cut 1 Cut 1.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 2 Cut 1 Cut 1 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 2 Cut 1 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 1 Cut 2 Cut 2 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 2 Cut 1 Cut 1.Stl
    3D View
    Ni Repaired Cut 1 Cut 2 Cut 1 Cut 2.Stl
    3D View
    Ni Repaired Cut 1 Cut 2 Cut 1.Stl
    3D View
    Ni Repaired Cut 1 Cut 2 Cut 2.Stl
    3D View
    Ni Repaired Cut 2.Stl
    3D View
    Etiquetas
    mechanical working ninjaflex skyrim bow nightingale detail engraved
    Objetos interesantes para ti
    Mostrar más