NOT SO ENOURMOUS TANK UPDATE [PRESUPPORTED]

Published 2024-05-01T17:41:10+00:00

Tabletop

9,200 visitas 1,496 descargas

Imágenes de la comunidad Añadir tu imágen

3 comentarios

Cargando comentarios...

NOT SO ENOURMOUS TANK UPDATE [PRESUPPORTED]

Published 2024-05-01T17:41:10+00:00

AlpineWeiss3D

@AlpineWeiss3D

33 objetos

1,484 Seguidores

85 3 Add to Collection

Descripción

Hello,

I hope you will enjoy this release!

******This kit is only a update kit and is therefore incomplete, please acquire the full kit to build a Leman Russ, This kit will not work without the full files******

As Always:

LYS-prefix -> presupported Lychee file
STL-prefix -> presupported STL file
no prefix -> raw model

The main hull & tracks are hollowed out, this kit is optimised for resin printing.
I have included unsupported files that should hopefully print fine with FDM. Named accordingly.

Remove the presupported track guards with a bit of caution, they are a bit thin :D

I have included smaller conversion bits to use in conjunction with the plastic Leman Russ kit. Furthermore, the Leman Russ turrets can be used on the GW plastic Leman Russ kit.

Use 6x2mm Magnets for the following:

- Main Guns
- mounting the "Calliope" kit onto the normal Russ turret

The turrets can now be magnetised to the hull with a 10x2mm magnet.

All other magnets used are 5x1mm.

Each turret now has a 5x1mm hole in the bottom of the cupola to allow a tank commander to be magnetised.
Also, each turret variant now features a 0,75mm hole at the hinge of the cupola.
this hole is meant to allow free movement of the cupola, you have to use a small bit of a paperclip to be able to use this feature. (you may need to glue the paperclip).

There is also a cutout on both sides of the turret to allow them to use coaxial heavy stubbers/cameras.
If you don’t want that you can mount the camera or the appropriate hardpoint option, there.

Don't Forget to read the READMEs for the calliope/loop antenna in their respective Folders.

Difference Between Track 1 and Track 2 are the skirts on the tracks, track 2 has the skirts like the Rogal Dorn & Baneblade.
The skirts on Track 2 are now separated to allow for easier painting.

Please Keep in mind that the lychee files of the Right side of tracks 1 & 2 have invalid holes. If you want to Export the Lychee files as a 3D model, please use the file with the "STL-" prefix instead. Lychee will also Show you a warning if you want to Export the models with invalid holes.
If you just want to save the Lychee file or slice it directly in Lychee you can ignore this and just use the Right side's tracks Lychee file normally.

No scaling needed, Scale is 1:1.
Print everything once, unless told otherwise.

feel free to donate me a coffee or join my Patreon if you want to :D

https://ko-fi.com/alpineweiss3d

https://www.patreon.com/c/AlpineWeiss3D

for further questions you can reach out to me via

Discord: weisssnix_97255
Instagram: alpineweiss3d

As always please leave suggestions, feedback or ideas in the comments of the model or join my discord to stay updated:

https://discord.gg/eA6zy9KGCZ

Stay tuned!

Mostrar más Mostrar menos

Licencia

BY-NC-ND

Información técnica

Más información

Archivos

Date published	01/05/2024
Sin apoyo	YES