Loading
Overwatch - D.Va & Meka - Victory Pose
3D
Published 2017-09-02T15:11:28+00:00
-
base
-
dva-arm
-
dva-body
-
dva-full-character
-
dva-head
-
dva-legs
-
meka-body-back
-
meka-body-top
-
meka-body
-
meka-cockpit
-
meka-full-character
-
meka-left-arm
-
meka-left-back-booster
-
meka-left-controle
-
meka-left-leg
-
meka-left-side-booster
-
meka-pelvis
-
meka-right-arm
-
meka-right-back-booster
-
meka-right-controle
-
meka-right-leg
-
meka-right-side-booster
Overwatch - D.Va & Meka - Victory Pose
3D
Published 2017-09-02T15:11:28+00:00
Follow Us on Facebook for the latest info and a chance to vote what i sculpt next
see this massive printed version with spinning guns by vang1. thanks man
D.Va is a former professional gamer who now uses her skills to pilot a state-of-the-art mech in defense of her homeland.
Twenty years ago, South Korea was attacked by a colossal omnic monstrosity that rose from the depths of the East China Sea. The massive, lumbering construct caused catastrophic damage to coastal cities before it was driven back beneath the waves. In response, the South Korean government developed a mechanized armored drone unit, called MEKA, to protect urban environments in future engagements with the omnic threat
This Print Will be difficult to put together. theres alot of parts if you want to print it larger and it will require alot of sanding and mucking around.
| Date published | 02/09/2017 |
| Tecnología | FDM |
| Complejidad | pages.object.complexitydifficult |
Here's my version. Makerbot 5th Gen at 200 microns. I should have done it at 100 but I was testing a leg and decided to just finish it. Painted in Tamiya colors. Now saving up for that SLA printer......
Alto = 42 Cms Gracias!!!
Clear base and cockpit windshield to allow for LED lighting. Printed at .08 layer height
Printed at .1mm and made it look like it came from a Middle Eastern campaign. I also corrected the top hatch to make it more game accurate.
.1mm and painted in desert camo for the "Cactus Skin". Used Tamiya acrylics and weathering kit.
Thanks, done this model and was GREAT. THANKS A LOT -0,1mm LH (except dva which was 0,05) -Painted by Hand -added a magnet to fit dva on top. ------------------- Description Hecha en una Kossel Delta al 130% y con una altura de capa de 0,1 excepto en DVa que es de 0,05 Pintada a mano, he añadido un iman para poder montar y desmontar a Dva -lijar -lijar -lijar más -imprimación -filler (aparejo -lijar -imprimar -base de pintura en spray rosa MONTANA -detalles a mano con pincel -barnizar. PD: muchas gracias por el modelo
Thanks for the great model! I printed this, and others, for the Overwatch players in my family. Printed this figurine in 5 pieces (Pedestal, Meka legs, Meka cockpit/controls, Meka canopy/guns, D-Va) by combining the respective pieces in ZBrush and dynameshing/Zremeshing to give a single water tight piece for each part whilst retaining the detail. Printed with a single brass PLA filament which gives the model a large range of hues depending on light and viewing angle as seen in the photo. All parts at 0.2 mm except D-Va at 0.1 mm. Next step is to learn some finishing and painting skills such as those on display from other makers here. In the meantime I'm pretty happy with the metallic trophy look.
Layer Height: 0,05mm
I like how it's well balanced and stands on its own.
So I make one at 150% at 0.1 with 25% infill. (CR-10)
This was one of my earlier 3d printed objects. FDM print was sloppy at the scale so I used it to practice painting especially for metals. Turned out okay.
Thankyou Printed Obsession for this wanderful model. I hope you like my little print.
This was challenging for me to print. I had to split the parts since there are not many flat surfaces. I had fun dialing in my printer for better resolution. I learned some new settings along the way for Cura which helped. Painting the figure is also fun. Thanks for the model. Gave it to my son who likes that game.
Thanks for the amazing model! Still have some light cleanup to do and paint of course, but I think it came out pretty ok. D.Va printed with 0.2mm nozzle at 0.08mm layer height and Meka with 0.4mm nozzle at 0.12mm layer height.
Printed at 50% scale. Had a bit of a flake on one of the rear legs, but came out surprisingly well.
Meka in pink? Ok.. but at least heavily chipping applied ;o)
Came out great!!!
Printed last might for my daughter-in-law, toothpick for size reference
Very nice model. Printed at 70% scale for max size on Elegoo Mars in one shot Grey ceramic resin and clear blue resin.
My vision of the méca so far. Dva in under my printer right now with a transparent visor. Thanks @printedobsession for all your design (even it's the first that i post back here...sorry)
Cel Shading Meka
.035 mixture of Siraya Tech smoky black and sainsmart grey. Primed with Mr Surfacer 1500
As always amazing model :) , i wanted to spend more time on it but i messed up the white so thats the result xD
thanks for your model。im very like it。
thank you for your model. I'm at the first print and color
first print and color
Hello, this is my make for DVA. It's my first painting job of a figure. I have painted it with an airbrush and by hand. I hope you like it.
Printed 55mm high so painting it was a challenge, I fancy printing a larger one as it was a lot of fun. I only started painting 10 days ago but the model is forgiving for newbies. Thank you for sharing this superb model :)
I printed 200% scaled D.VA. But I found Meka 200% is.....really too big......will use too much time to print.... I will reprint a original size.....