Panzerwaffenteam
$9.00 Panzerwaffenteam
3D
Published 2023-05-18T08:29:29+00:00
This is a part of our Kolossale Kampfpanzer project!
40% discount on STLs for all Patrons and Tribers!
myminifactory.com/users/DakkaDakkaStore?show=tribe
patreon.com/dakkadakkastore
More models from this project here.
All bits from this project are mutually compatible. Check out the project’s →STL catalog←.
Number of STLs: 12x2 (38x2 for Core) (Unsupported, pre-supported and solid files are included).
Height: 42mm from top to bottom.
Approximate resin volume: 88.3g (368,2g for Core) (Elegoo Standard Resin).
Scale: 28mm
Test-printed for resin printing.
CONTACTS AND LICENSE
All rights reserved. Commercial use is provided ONLY if there is a commercial license. See our Tribe for details:
Patreon
Join our Discord community and be sure to follow us on Instagram @dakkadakka.store not to miss any updates!
for units:
layer height - 0.03mm
exposure time - 3 sec
For vehicles and terrain:
layer height - 0.05mm
exposure time - 4 sec
| Date published | 18/05/2023 |
| Precio | $9.00 |
Just some feedback. I really like this tank model, however I found it a bit smaller than I would prefer for 28mm scale. The white base coated tank in the picture has been printed at normal scale, while the painted one has been upscaled to 160% of normal size. I was able to keep the existing pre-supported files for upscaling with no issues. Guardsman shown for scale comparison. Cant wait for the Superheavy's :)