Scifi Grimdark Stratum Commonwealth WTC Competitive Play
$16.00 Scifi Grimdark Stratum Commonwealth WTC Competitive Play
3D
Published 2024-07-22T10:12:11+00:00
This set of 'greater good' themed WTC compatible 3D printable Stratum Commonweath terrain pieces is ideal for competitive play grimdark and ruined scifi tabletop layouts.
Scaled for 28mm - 32mm, the set features one large 3 storey L-shaped building, one 2 storey L-shaped building, and one cargo container. Perfect for giving benefit of cover and blocking LOS. The buildings footprint match the WTC layouts for 9" x 5" structures to fit on a 12x6 footprint base. The cargo container measures the appropriate 5" x 2.5" x 2.5" for stackable containers. The internal floors measure 9" and 5" dependiing on the storey. Floors are 33mm wide. Storey heights are 3" tall.
The storeys are stackable and have a hole and nub system for secure gameplay.
Ruined version of each building included!
Each building prints as multiple pieces and connects with OpenLOCK clips. A full version of each storey is included for those with larger print beds.
Pieces can be mirrored in your slicer to create extra ruins!
Dimensions:
2 Storey Lower Wall A - 33mm x 185mm x 79mm
2 Storey Lower Wall B - 30mm x 83mm x 79mm
2 Storey Lower Corner - 65mm x 65mm x 79mm
2 Storey Upper Wall A - 38mm x 83mm x 76mm
2 Storey Upper Wall B - 38mm x 83mm x 76mm
2 Storey Upper Corner - 51mm x 51mm x 134mm
3 Storey Lower Wall A - 31mm x 185mm x 79mm
3 Storey Lower Wall B - 30mm x 83mm x 79mm
3 Storey Lower Corner - 65mm x 65mm x 79mm
3 Storey Upper Wall A - 37mm x 185mm x 79mm
3 Storey Upper Wall B - 37mm x 83mm x 79mm
3 Storey Upper Corner - 44mm x 44mm x 79mm
3 Storey Top Wall A - 51mm x 185mm x 118mm
3 Storey Top Wall B - 51mm x 83mm x 118mm
3 Storey Top Corner - 59mm x 59mm x 118mm
Cargo Container - 127mm x 63mm x 63mm
Recommended printing resolution - 0.2mm. All files can be printed on a 200mm x 200mm FDM print bed. Supports not needed.
Everything is ready to throw into your slicer of choice and start printing.
The split models can be printed on smaller 180mm x 180mm FDM prints beds by rotating the model approx 45 degrees on the z axis.
Similarly, the full floored models can be printed on a 256mm x 256mm by rotating the STL in the slicer to fit on the diagonal.
| Date published | 22/07/2024 |
| Precio | $16.00 |
| Sin apoyo | YES |
660 grams for the three storey and 370 grams for the two storey