Starship Sleipnir
$49.95 Starship Sleipnir
3D
Published 2020-09-30T15:14:22+00:00
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and ready to take lighting in the engine and airlock room. Perfect for games such as Traveller, The Expanse, Starfinder or Stargrave.
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
Version 1.1 Updates
- Reoriented several parts from Deck 11 to print optimally. Please note, Hull - Deck 11 - Engineering - Floor - Corner Engine Mount.stl will now require reorientation
- Fixed gap in Interior - Deck 05 - I - Sink and Grower.stl
Most parts are already oriented in their optimal printing position. Most parts do not require supports. Recommended printing resolution is 150 microns/0.15 on a 0.4mm nozzle. Printing in PLA on an FDM is considerably cheaper than SLA. Parts are optimised for 3D printing on an FDM printer.
Largest Part is 65×178×51 mm (2.5×7×2"), can be rotated to 135×135×51 mm (5.3×5.3×2").
| Date published | 30/09/2020 |
| Precio | $49.95 |
| Cantidad de filamento | 5000 grams |
I'm having a problem with floor of Deck 11, were the sections are recessed that only seems to leave a single layer which leaves some gaps. I've tried with different settings, this is the E - Floor - Bulkhead printed at 0.15 with light grey and 0.2 on the dark grey. Is there anything you can suggest here?