The Shelter - Storage Shelves
$4.99 The Shelter - Storage Shelves
3D
Published 2020-07-06T12:13:46+00:00
The Shelter - Storage Shelves
28mm Modern metal shelves, both empty (one variant) and loaded with food and other useful stuff while preparing for the end of the world (four different variants)!
Easily scalable for 20mm to 54mm terrains, vignettes or dioramas!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested and the pieces shown in picture are printed at 1:56 scale with an Anycubic Photon S printer. Any budget entry resin printer will be capable to achieve the results as above.
The models come both pre-supportend and not supported. We recommend to try to print them with the included supports first, since they have been thoroughly tested in that configuration.
| Date published | 06/07/2020 |
| Precio | $4.99 |
| Sin apoyo | YES |
So this would be the first time i will have ever left a bad review for a file but i feel its necessary.The design and look of these shelves is fantastic, however the way they are supported makes for a nightmare. I'll be adding some photos as an example. Problem 1 : The legs are too thin and flimsy. Even while being exceptionally careful on removing supports, i broke at least 1 leg on 5 of the 12 i printed. 3 had more than one broken leg. Problem 2 : Shelf 3.stl is horribly pre-supported. the supports run through the bottles on the top shelf to the other bottles making them impossible to remove the supoports without breaking off the bottles.Both of these problems can be fixed by using your own supports but when you pay for a pre-supported item, the supports she be tested to work and they do not.