Tiger Articulated Figure, Print-In-Place Body, Cute Flexi
$3.98 Tiger Articulated Figure, Print-In-Place Body, Cute Flexi
3D
Published 2023-06-03T18:40:48+00:00
I'm excited to share my Tiger design! This is 100% Print-in-place, where one body part pre-supports another as it builds upwards. No additional supports needed! Once printed, you just have to wiggle the joints to break the small contact points and free up the articulation (see video).
I have included a pre-painted .3mf file for you multicolor printing enthusiasts. The file will work in both Bambu Studio and PrusaSlicer.
Please watch This Video on the best way to free up the joints (demo'd on the Bunny model)! Be use extra care when printing in more brittle filaments like silks. Please use 3 walls if you use a 0.4mm nozzle!
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.
- Print-In-Place. Pre-supported. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them. Be Extra careful with brittle filaments, like silks
- 10-20% Infill.
- 3 Walls if using a 0.4mm nozzle. <--This is very important!
- .3mf File Included! This file works in both PrusaSlicer and Bambu Studio. It includes the painted model, but you must still edit the print settings to match your machine and filament.
Please watch this Video on the best way to free up the joints (demo'd on the Bunny model)!
This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.
**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.
| Date published | 03/06/2023 |
| Precio | $3.98 |
| Sin apoyo | YES |
!00% in Ziro Starry Night