Ha! What do I win? ;) I went with 10% and 1.5 layer height since i dint want to mess with my pres-sets cause im lazy. So far 2 leaves and the tree both came out great.

yeah i have a dark turquoise to go with my green but its not ideal. I may do some red/yellow for fall. The wood filament does look great.

my entree. ha ha, tree in entree. dont copy it! a zombie reaching out of the ground.

Almost done printing the Tippi Tree. After I finish printing all the leaves (7 more to go), I'll print some branches.

A complete game of Tippi Tree. I won a match and had lots of fun.

The model is perfect to print in wooden filament!!! Now we need a way to store it!! :D

I now have 3 of these printed i used the I3 Mega, Ender3 and Sidewinder x1

This is well designed and it printed great! It's fun to play and easy to set up. We like it so much we're printing a set of Tiny TippiTree. Note: you may wish to put down a game mat/pad if your table top is easily dinged up

Printed the leaves on my Ender 5 Plus, the tree was done on a Prusa i3 MK3S. Doing 2 more sets to send to my brothers and sister with kids. Just played a test game with the wife and its a blast, will be making a 4th set for us now lol.

I was super excited to print this one out. The normal-sized pieces print correctly and are comparable to what the printing guide recommends on page 4. The tiny tree files (the main reason I purchased this), are not usable though. I have attached images to explain, but there is too much clearance for them to hang off one another. Could fixed files be uploaded? I would normally not request this, but at $12 for the files, I expect them to print as you claim (which they don’t). I have looked more closely at the files and it has to do with the stl’s themselves, and not my printer.

Meet Jerry the Giraffe. He's a very competitive Giraffe. In this tippy tree you make his hairdo. God bless!

Like it. Printed with a 0.6 mm nozzle, because i am too impatiant, to wait hours ans hours to finsih all the pieces.

Just got this downloaded and printed out the TIPPITREE base, one set of branches and trunk as well as getting the first set of 12 leaves completed. I'm excited to get this playtested with the family. However, it seems to be missing a small TRUNK STL in the standard TIPPITREE folder while the other variations have both small and tall. Anyone else notice this? Thanks.Tree was printed on my Qidi X-Maker in AMOLEN Wood PLALeaves were printed on my Ender 3 Pro in Overture PLA PRO

Great design Devin! Looking forward to play this with my nieces :) (didn't have any green PLA for the leaves, so went random instead)

I made a set of the Tiny prints - they worked pretty well, if a little loose so they don't lock as well as the larger ones. I'm guessing I'll need a different profile for the smaller ones, but it's a balance between getting a good clearance, and not having a seam catch and make them too tight, on my Sidewinder X1.I also made a box for a set of tiny ones. For me a set includes... 1 x tree, 3 x branch, 2 x tall trunk, 4 x trunk, 16 x player 1 leaf, and 16 x player 2 leaf. They all fit nice and snug in this box.

Great Design and an awesome game. Busy making a few as gifts for my family and friends Material is Cron PLA and MambaWire PLA

We absolutely love this game! It's always surprisingly devious with multiple players, and incredibly zen to play alone. Even our three year old loves it! I've already made a few sets so our extended family can practice while we limit in-person socializing. I also designed a storage box to hold a basic set of pieces.

Tiny version works great with V2 Leaf. Thanks for this game

Love this game, so fun

Haven't done the full size ones yet, but the tiny set was a SUPER easy print. Took about 8-9 hours and was able to fit the full set on the bed of my Ender3 Pro in Hatchbox PLA. ZERO cleanup needed, it all just worked. Going to print several sets in different colors and mix them all up and give a few away to folks. Love it!

Support? I have to admit i'm more used to fdm printing and not used to resin at all, but i didn't use any support for it and just printed it flat on the photon zero. i had the build plate full every print i think.

Hey Devin, this is great! Thanks so much. I'm happy to share some video when I can get some. In the meantime, here is my 5-year old grandson playing with his Tippi Tree. A very loved present, thanks again.

We use the test pieces as extra game pieces for variety. Very fun game and easy to print. Highly recommended. I'm already printing more sets to gift.

Another TippiTree set in wintry colors.

I finally got my set complete along with a case to box it all up. Thank you so much for this! I look forward to your amazing work in the future!

the grandfather love it more than the nephew at the end :,)

This is what your mother feels like at the end of the day, after dealing with all the kids. This is for all the mothers out there. ;) Materials: The tree and branches are OVERTURE brown PLA, and the leaves are MatterHackers Build PETG transparent colors.

Just got your filament @Make Anything :) Can't wait to use it! They also gave me a pen and some candy :) How can I access the Tikki Tree? Because It would look so cool if I print it.

My white and pink cherry blossom Tippi Tree! Printed with SpiderMaker's PLA in Paper White, Orchid Purple, and Kraft Brown.

Printed from Nebula PETG Blue Sky, because that was on my hand. My 3-year-old daughter immediately confiscated it :-D Can't wait for Tikki Tree, because seeing the design stream, that is what convinced me to buy this whole game. I tried to design my own expandable case for this game. printable on Prusa MINI. Awailable on PrusaPrinters: https://www.prusaprinters.org/prints/55274-tippi-tree-expandable-case-v1 I'll appreciate any ideas for version 2

Made with silk copper, silver, gold and emerald from Eryone

Printed using cheap Sunlu rainbow filament on a Prusa MK3S. Effectively you get the quality of 0.1mm with the speed of 0.3mm layer height. The only thing I'm not that happy about is the bridging but that's unrelated to the layer height.

The colors combination of yellow, peak green and orange (from eSun) came out great. I also discovered that the split tree base can be used to add an extra trunk section upside down below the main trunk. This makes the whole thing a whole lot more Tippi, which is great. I wanted to print the Tiki trunk in the same way, but unfortunately there is no top/bottom split variant of that. @MakeAnything any chance of a split version of that someday?

Tippie Tree sais no to gravity

I use this in class with my students. they LOVE it. great job on this man. Loving the look of the new parts.

Since my toddler was scared of the crows and never heard back from the creator i made a pesky parrot (we own some) so now my other kid use it to eat seeds or fruits from the tree lol

Play in English language class in Vietnam. Interestingly younger students make really wide trees, in one case it was nearly a meter wide, teenagers make more compact and taller trees.

Hi I just printed the test print was wondering if this how it should look like

Great fun to play with friends.

This game is awesome! It took time to print all the parts but absolutely worth it. Thanks for the design!

Great model. Easily printed @ .2mm

Absolutely love this game! Great fun with family and friends. Thank you so much Devin!

EL MEJOR REGALO PARA LA FAMILIA

Printed the game+ a box to match! We love it!

Great game, currently printing different color and finishes of filament for different versions.

Tippi Tree with vines and flowers. The trunk was printed with the "fuzzy skin" setting in Cura. The vines and flowers were drawn on with a 3D pen.

I’m having issues with fitting the pieces. They fit in every direction except the one side won’t go into 2 spots. It goes in on the opposite side, every other piece fits into the section that it won’t fit in. Any suggestions as to what I’m doing wrong? It’s just the one piece on the end and it won’t fit on just one side of the leaf but everything else works perfectly fine in all areas and on both sides. And it’s the same issue on both leaves. Everything else seems perfect.

Make Anything's Tippi Tree Stacking game but as a Spraying Fire Hydrant!

Leaves are paired up so they are double stacked for max compactness. And the branches are stacked on one end of the box. This one is going to be a cherry blossom tippi tree. (I definitely just didnt run out of green... :P)