Tower and gate
$10.00 Tower and gate
3D
Published 2022-10-01T10:03:08+00:00
This item is part of the September release on my Tribe.
The 3D models for SLA printing are modular and in two versions, without and with supports and can be created on small printers such as Elegoo Mars. The doors and possible windows if present, are movable.
The 3D models for FDM printing are ready and assembled for each floor. I remember that they require supports for very few areas and you can opt for automatic supports with a 10/15° threshold or otherwise my advice is to exploit dynamic painting using organic tree supports. The doors and possible windows if present, are not movable.
I remind you of the printing of the floor, do it last in such a way as to modify its dimensions in relation to the internal space of the assembled construction
The models are adapted for a 28mm scale and can be resized to the scale you prefer, such as for a 28mm to 32mm conversion, the enlargement percentage is 114.30%
The tower as well as the gate are modular. In particular for the tower you can vary the heights (the renderings are for reference) and possibly create more copies, varying the various pieces that you will find in the archives. Same rule for the upper battlement, you can avoid putting 3 instead of 4 to allow the passage.
| Date published | 01/10/2022 |
| Precio | $10.00 |
