Trench Terrain: Bunker
$6.66 Trench Terrain: Bunker
3D
Published 2024-11-28T18:05:44+00:00
My fellow pilgrims of the holy Trenches!
Are you getting shelled with artillery, day and night, while you try to enjoy your time in the muddy, wet and miserable trench? Or do you want to have a rest after crusading, preferrably with a roof (or no roof) on top of your head?
Then you need the Trench Terrain Bunker! For your Trench Warfare needs.
Interior: Playable (top of the bunker is removable and being held in place with pegs that slot into the lower part)
Scale: 32mm
Approx. size of the bunker: 140 x 150 x 270mm (5.5 x 6 x 10.5")
PRINTABLE WITH FDM or RESIN PRINTER. (FDM recommended, can be printed support free)
Includes supported and non-supported files.
For FDM printing the objects should be printable upright, support free.
NOTE: PRINT THE ENTRANCE PART SO THAT THE SIDE THAT ENTERS THE BUNKER IS FACING DOWN (to avoid the overhang - see comment section for a picture if unsure of the correct orientation)
Included:
- Trench Bunker
You can also play this as a WW1 / Medieval watchtower! Just leave the top part off.
NOW AVAILABLE: RUINED VERSION OF THE TRENCH BUNKER
Happy trenching!
Update 8.1.2025: Version 4 (unsupported) - Enlarged the tower 5% to make it fit the hole on roof better. Adjusted the roof 1.5%
Update 27.1.2025: Added supported/hollowed version of v4 bunker for resin printing and compiled everything into 1x .zip.
Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon
| Date published | 28/11/2024 |
| Precio | $6.66 |
Issue mentioned by a buyer was fixed within 3 hours of receiving the message! (I just had forgotten to even out the bottom after sculpting) I cannot remove the now-old error pictures, so here is a proof that everything is okey now. For users that bought this and have version 1, please re-download the version 2 to receive the fixed files.Sorry for the inconvenience! And happy printing everyone. :) (use the orientation in the picture for printing the entrance part)