Trench Terrain: Trench System Bundle
$11.00 Trench Terrain: Trench System Bundle
3D
Published 2024-12-13T21:40:32+00:00
My fellow pilgrims of the holy Trenches!
Do you need a muddy, and overall very horrible place to hide (and die) from the bullets of your holy or unholy enemies?
Look no further! This Trench System Bundle is for you! This bundle has a total of 46 different pieces you can use to build the trenches you have always dreamt to have!
How to make a single piece of trench?
1. Print a wall piece
2. Print a topper piece
3. Glue topper to the wall piece
4. Attach walltopper piece to a 4cm foam
Now you have one piece of trench ready!
I recommend adding the wooden walkways on the bottom of the trenches. They help to blend the trenches with any kind of battlemat you are using.
Scale: 32mm
Approx. size of a wall piece: 50 x 40 x 10mm (2"x 1.6"x 0.5")
Size of a wall piece is measured without a topper or the topper stubs. With an attached topper the depth of a trench is approx. 50-55mm.
DESIGNED TO BE FDM PRINTED (SUPPORT FREE)
(For resin printing supported files are not included, but designs are perfectly resin printable as well)
You can print wall pieces in two different orientations, upright or laying flat. Other pieces just print flat. No supports needed.
Included:
- Total of 34x Trench pieces
- 18x trench wall pieces
- 12x corner pieces (3x different angle for inner / outer corners)
- 11x trench wall toppers (includes 1x empty so you can make your own toppers if you wish)
- 5x trench plank walkways
UPDATE 9/2025:
- Added toppers for corner pieces. To use these, you need to cut the middle peg off from the corner pieces with clippers. They slot into the farthest pegs.
I recommend test printing a topper and wall piece to make sure everything fits as you expect.
Happy trenching!
Updates (latest update 9/2025:
- Due to requests I added corner pieces to the set! Check the separate .zip. :)
- Added toppers for corner pieces. To use these, you need to cut the middle peg off from the corner pieces with clippers. They slot into the farthest pegs.
Want monthly Trench STLs? Consider joining my Tribes or Patreon! Limited amount of discounted Early Bird spots available: Tribes /// Patreon
CHECK THE REST OF MY TRENCH STLS HERE
| Date published | 13/12/2024 |
| Precio | $11.00 |
Official pieces? Not sure what that is. I agree these are close but the walls are just a couple mm too high for a nice level fit on a 1.5" thick piece of pink foam.