Vaultis – Modular GM Treasure Vault (Personal License) | 3D Printable Storage System for DnD & RPG
$24.99 Vaultis – Modular GM Treasure Vault (Personal License) | 3D Printable Storage System for DnD & RPG
3D
Published 2026-04-09T15:09:48+00:00
This product includes a Personal Use License.
If you are interested in a Commercial License, you can find it here:
https://www.myminifactory.com/object/3d-print-787060
Every GM needs a proper vault.
Vaultis is a modular storage system designed to keep your dice, minis, cards, and tools organized and within reach during your sessions.
With 6 unique themes and flexible tray setups, it helps you keep your table clean while adding a strong visual atmosphere to your game.
Included:
6 themed treasure chests
7 modular trays
5 standard size
2 tall trays
Tray system:
3 standard trays fit in one chest
OR
1 tall + 1 standard tray
Themes:
Necromancer, Ancient, Dwarven, Sci-Fi, Elven, Royal
Kickstarter Project
Vaultis - GM Treasure Vault - STL Files – Kickstarter Campaign
https://www.kickstarter.com/projects/crosaden/vaultis-gm-treasure-vault-stl-files
Designed for 23x23 cm or larger printers
Support-free printing
Optimized for FDM printers
Magnet compatible system
Magnet Setup:
Uses 5x2 mm magnets
16 magnets per chest (top + bottom)
Alternative:
Includes 5x4 mm pin option
Trays & Tray Sizes
The first 4 trays have a handle in the middle for easier lifting.
The other 3 trays have side holes for easier lifting.
If there is no size written on a compartment renders, it means it is symmetrical and the same size as the opposite compartment.
5 Trays 2 Trays
(normal size) (taller size)
x = 168mm x = 168mm
y = 168mm y = 168mm
z = 36mm z = 72mm
Treasure Chest Sizes
Interior dimensions of the Treasure Chests: 170 mm x 170 mm x 110.4 mm.
Necromancer Treasure Chest
Top Bottom
x = 201mm x = 208mm
y = 223mm y = 222mm
z = 73mm z = 115mm
Ancient Treasure Chest
Top Bottom
x = 208mm x = 208mm
y = 209mm y = 214mm
z = 102mm z = 115mm
Dwarven Treasure Chest
Top Bottom
x = 216mm x = 216mm
y = 217mm y = 217mm
z = 58mm z = 115mm
Sci-Fi Treasure Chest
Top Bottom
x = 218mm x = 218mm
y = 218mm y = 218mm
z = 32mm z = 115mm
Elven Treasure Chest
Top Bottom
x = 208mm x = 216mm
y = 208mm y = 216mm
z = 72mm z = 115mm
Royal Treasure Chest
Top Bottom
x = 208mm x = 208mm
y = 208mm y = 208mm
z = 72mm z = 115mm
Printing Information (Average Estimates)
Based on standard FDM settings and approximately 5% infill:
Time: ~11 to 14 hours per chest section
Trays: ~4 hours each
Avg material per full chest (top + bottom): ~650g filament
Avg material per tray: ~160g filament
Each chest holds up to 3 trays.
Actual printing time and material usage may vary depending on settings.
| Date published | 09/04/2026 |
| Precio | $24.99 |
| ¿Cuándo tiempo lleva? | 660 - 840 minutos |
| Cantidad de filamento | top+bot chest: 650g - per tray 160g |
| Dimensiones | 230mm x 230mm x 115mm |
| Tecnología | FDM |
| Sin apoyo | YES |
Looks good at 75%