Vienna City Hall - Austria
Vienna City Hall - Austria
3D
Published 2021-06-25T10:26:03+00:00
Willkommen in Österreich!
For the first time in the 7 years of MiniWorld3D, we are publishing a huge model. Breaking all boundaries, it was conceived to push you and your printer to the limit! Our most detailed & largest model to date:
The main façade of the Vienna City Hall, in collaboration with ZODIAC.
(*Read the Printing Details in the section after this)
The Vienna City Hall (German: Wiener Rathaus) is the seat of local government of Vienna, located on Rathausplatz. Constructed from 1872 to 1883 in a Neo-Gothic style according to plans designed by Friedrich von Schmidt, it houses the office of the Mayor of Vienna as well as the chambers of the city council and Vienna Landtag diet.
The design of the richly adorned facade is modelled on the Gothic architecture of Flemish and Brabant secular buildings like the Brussels Town Hall. It features five towers including the central tower with a height of 98 m (322 ft). On 21 October 1882, the Rathausmann statue was installed on the top, which soon became one of the symbols of Vienna (from Wikipedia).
The real building has an enormous area, with a floorplan shaped like a square spanning a whole large block, with several inner courtyards. This model depicts just the main façade, one of the sides of the large block, facing the Rathausplatz & Rathauspark.
This model was created in collaboration with ZODIAC as a torture and quality test. If you have a ZODIAC nozzle, can you pass this test? If you don't, try comparing results with and without one.
The modular design is meant to be printed very large, the photos show a 300% print, so all the minute details show up perfectly with a standard 0.4 mm nozzle.
Parts included:
- • Main tower (split in A. base, B. clock, C. belfry, D. spire)
- • x4 side towers (each is different, and numbered accordingly)
- • Façade R (with MiniWorld3D & ZODIAC logos)
- • Façade L (with the model name)
- • Corner (must mirror in your slicer to print the other side)
- • Roof Main (must mirror in your slicer to print the other side)
- • Roof Corner (must mirror in your slicer to print the other side)
To print this all as a single piece you must arrange all parts manually in your slicer and slice together at once.
MiniWorld3D is excited to bring this model to life as a homage to all the people of Austria. This model was designed completely from scratch using photos as reference, no scans or fixed Sketchup models, so it's pristine clean for 3D printing! Please give credit 🙏, it's all about spreading culture and education!
Be sure to follow us:
www.instagram.com/zodiacnozzle
MiniWorld3D is a collective of 30+ artists creating the best library of 3D printable models of landmarks of the world!
This model was created by MiniWorld3D founder Dany Sánchez.
Print in the photos made with Spidermaker 3D filaments matte PLA clay, fair skin & iron grey.
Real location photo by Thomas Ledl CC BY-SA 4.0
NO SUPPORTS.
Proven to print all small details with a 0.4 mm nozzle if scaled 300%.
To print as a single part, you must add and arrange all parts manually in your slicer and hit slice with all at once in place.
In Cura, you must mirror the corner and its roof, and override the z floor for the roofs and towers.
Optimized to save print time and material.
Minimal post processing with a knife, heat gun, or sandpaper may be needed to remove typical print artifacts, stringing, and ensure a correct fit. Tolerances have been exaggerated to avoid problems.
Speed: 20 mm/s outer perimeter
Infill: 12% with 2 steps (3% for most of the volume, then doubled twice as it nears flat top surfaces)
Print time at 300% scale & 0.2 mm: Large parts take ~24 hrs, the tower parts about 3. Roofs between 2-5 hrs, these can be printed at 0.3 mm.
| Date published | 25/06/2021 |
| Sin apoyo | YES |
Fantastic STL file design, I printed at 300% as suggested. I have seen the building in person on a visit to Vienna.... it is an architectural jewel. Much fun to print, I now have a great conversation piece for my home. Many thanks!!