Mine Now Mimic Mini - SUPPORT FREE!
$2.99 Mine Now Mimic Mini - SUPPORT FREE!
3D
Published 2025-03-11T20:03:22+00:00
By downloading this item, you agree:
- Not to distribute the files
- Not to sell prints of this item.
You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items.
🔗MMF: bit.ly/FatesEndTribe
🔗PATREON: bit.ly/FatesEndPatreon
While you're at it, check out Furhaven: bit.ly/FurhavenGame
════════════════════════════════════
📦👁️ Mimic Mini 👁️📦
That treasure chest you were about to open? Bad news—it just grew teeth! The Mimic Mini is a classic tabletop menace, ready to deceive unwary adventurers and devour their loot (and maybe their hands!). With a slithering tongue, jagged fangs, and a sinister grin, this support-free, 3D-printable STL brings one of fantasy’s most infamous monsters to life!
Perfect for TTRPG encounters, display shelves, or painting projects, this highly detailed mini is a must-have for any dungeon master or mimic enthusiast. Just be sure to keep an eye on your dice hoard—mimics are known to collect things!
✨ Features:
- Support-free design for effortless printing
- Highly detailed sculpt, featuring wooden textures, sharp fangs, and a mischievous tongue
- Ideal for RPG lovers, dungeon masters, and miniature painters looking for a classic monster
Looks like treasure… but rolls for initiative instead! 🎲💀
════════════════════════════════════
EASY TO PRINT! Our files are designed to be 3D Printed easily without supports! (Supports are the WORST!) Due to the nature of miniatures, our miniatures & ornaments are pre-supported if needed!
Most FatesEnd files are designed to fit on a 7"x7"x7" print bed area or larger! All dice towers are designed to work with standard 20mm dice at 100% scale. (Dice set/tower scales are determined by the size of the D20 in the set.) If you need to scale the files, you may use the Dice Scale Chart found here: fatesend.net/resources
Our models are designed to be support-free for easy FDM printing—no supports needed!
- Layer Height: 0.2mm for standard prints, 0.12mm for finer details (enable Z-hop for delicate prints)
- Wall Loops: 3-4 for strength and durability
- Infill: 6-8% using gyroid pattern for optimal strength and efficiency
- Supports: Not needed! Our models are crafted for hassle-free printing
- Bed Adhesion: A well-leveled bed is usually enough, but a brim can help for extra stability
If you run into any issues or need advice, feel free to reach out! We love seeing your prints—share them with us using #FatesEnd!
| Date de publication | 11/03/2025 |
| Price | $2.99 |
| Quantité de filament | 13,940 mm³ (or 13.94 mL) |
| Dimensions | 28.17mm x 42.63mm x 32.44mm |
| Sans support | YES |
Very fast print, and Orange Sherbet Mimic