Polarity Box - hinged lid prints in place, zero support!
Polarity Box - hinged lid prints in place, zero support!
3D
Published 2019-10-10T12:25:11+00:00
I have a Patreon page with more print-in-place hinged designs!
Hot on the heels of the Singularity Box, here's another print-in-place hinged-lid box that requires no support! This time, it doesn't print on an angle, either. That does make it less fun, but it also makes it a vastly more reliable print :P
You might also like these free designs!
* Space Tube: myminifactory.com/object/3d-print-101772
* Cog Twist Box: myminifactory.com/object/3d-print-71772
* Cog Stacker Box: myminifactory.com/object/3d-print-81938
* Hex Stacker Boxes: myminifactory.com/object/3d-print-81713
* Star Box: myminifactory.com/object/3d-print-80521
* Little Stacking Boxes: myminifactory.com/object/3d-print-81714
* Hex Twist Box: myminifactory.com/object/3d-print-77281
* Rainbow Hex Box: myminifactory.com/object/3d-print-77277
* Citrus Box: myminifactory.com/object/3d-print-75181
* Heart Box: myminifactory.com/object/3d-print-74727
* Jigsaw Boxes: myminifactory.com/object/3d-print-49533
* Crescent Twist Box: myminifactory.com/object/3d-print-71925
Easy print! No support needed, no crazy angles! And yet there's a hinged lid! Crazy, huh?! :D
One of my test printers had trouble with the hinge tolerances, so I ended up making two versions, one looser and one tighter. If in doubt, go with the looser one, since that'll work just fine either way. It just won't be quite as precision-fit as the tighter version!
| Date de publication | 10/10/2019 |
| Sans support | YES |
Printed in Jake3D sparkled green!