Taj Mahal - Agra , India
Taj Mahal - Agra , India
3D
Published 2017-11-17T12:41:09+00:00
Welcome to India!
Here is another of the New 7 Wonders of the World on MMF!
The Taj Mahal, located on the south bank of the Yamuna river in the Indian city of Agra, was commissioned in 1632 by the Mughal emperor Shah Jahan in memory of his beloved wife, Mumtaz Mahal.
This impressive ivory-white marble mausoleum was designated in 1983 as a UNESCO World Heritage Site for being “the jewel of Muslim art in India and one of the universally admired masterpieces of the world’s heritage”(description by MiniWorld collaborator Angelo D'Angelo).
This model was created in 2017 by MiniWorld3D founder & lead 3D artist Dany Sánchez.
MiniWorld3D is excited to bring this model to life as a homage to all the people of Agra and India. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Please give credit, it's all about spreading culture!
Be sure to follow MiniWorld3D:
MiniWorld3D is a collective of 45+ artists creating the best library of 3D printable models of landmarks of the world!
Photo credits: main print photo by Angelo D'Angelo (instagram.com/johnnytrapano) Printed in a Fabtotum PrintingHeadPRO with cementum filament by Treed filaments, hand by @saudadinhas.
Other photos by @kinglyways , @ShakeandB1ake and MiniWorld3D.
Suggested parameters:
For better details, print slow, such as 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%
No supports needed, this has been optimized to eliminate all overhangs.
Brim or raft not needed, but might help if you experience warping in sharp corners.
The carvings and details might only be noticeable if printed large or in resin.
| Date de publication | 17/11/2017 |
| Sans support | YES |
Thank you for perfect model ;) Printed from EKO MB White Recycled PLA, 0.2mm layer, 0.4mm nozzle, 200°C/55°C, 80mm/s on Ender 3