Came out great!

Fantastic model! Printed in PLA. 20% infill. Supports on the build plate only.

Printed on Prusa i3 MK3s Scale: 70 % Supports: Yes Resolution: 0.2 Infill: 15% Thank you for the model

Nice nice nice, thank you very much for that print. My wife loves it

S M O L L Y O D A Did a fast print at 0.2mm layer, model is awesome

printed it hollow in Anycubic Green. Love this model, the Child is soooo cute. Green looks nice, but I will paint it some day

Printed this on an Elegoo Mars resin printer. It’s perfect! Kudos to Chris for an AMAZING model!

Silk Purple PLA. Printed on Creality CR-10S. Sliced in cura 4.4 with tree support. Love this print! Turned out really nice. Thanks!

I made it to scale it with the Black Series of the Mandalorian :D

Great model, printed no problem

Turned into a keychain. Carry it by the scruff just like the Mandalorian does.

Baby Yoda in Tianse Green PLA.

So cute! Had a lot of fun painting this little one! :D Thanks!

Prusa MK3s .2 quality, supports and raft, Prusament Galaxy Black. Thanks for the model.

Great model!

Full scale in the back, then 25%, 20%, and finally landed on 18% as the right scale with 28mm heroic figures. One finger on the left hand of the full scale failed both times I tried, but the smaller ones printed perfectly.

125%

So cute!!! Had it fail the first 4 times my printer kept destroying the support but then it finally worked :) included all angles just finished painting tonight!

Thank you for the great model! This model is, by far, the best likeness of the child that can be found. Excellent job! Printed in marble PLA on a CR-10 S4.

Ready for the holidays! Printed on a heavily upgraded CR-10S S5.

Printed on our Elegoo Mars.Painted by my wife.

Printed with prusa i3 steel, 0'16 layer, 15% infill

Great job on the model. It's the best one out there.

So cute~ thank you for nice modeling!

Resolução 0,28 Preenchimento 10% Raft 5mm Suportes Meshmixer Utilizei raft para fixar melhor os suportes na mesa. Nao confio na fixação de partes pequenas na mesa.

Not the prettiest but not the ugliest either. Made at 0.5mm layer height with hatchbox wood PLA.

Thanks

Great model this is @ 200% scale

Printed, sanded, filler primer, sanded, primed again, then painted.

Printed at 50% love the the little guy. Need to paint him will share if that goes well.

Wee little one standing on a penny. Eelgoo MARS, gray goo.

great Model!

Rainbow Silk Baby Yoda!

These baby Yoda models are awesome and they turned out great. Printed with Siraya Tech Fast green resin.

Really Nice, thank you! Print 200%.

Awesome model. Thank you! We just started 3D printing recently. Did scale him up a bit, and we didn't get him as smooth as some of the great pics/posts below, but he was a lot of fun to work with!

I love these baby Yoda models. Next time I print I'll probably adjust orientation so I don't end up with any support marks on the front/face. Printed on Anycubic Photon with Siraya Tech Fast green resin.

Scaled 72%. Removed the legs.

Thanks!

Ran out of Hatchbox Copper filament and had to switch to Solutech black PLA to finish it off but it turned out really well, the way that most everything prints without supports is awesome. Pained up with Acrylics after smoothing.

Printed at 275% Scale @ .1618 layer height. Raft and supports, Used testors putty for blemishes, then sanded and painted with Acrylic paints. I actually had the printer fail about 75% into the print, and I was able to print out the rest to salvage the model. The failure was due to my printer and not the model.

painted with matt acrylics :)) he's gonna be a christmas present. amazing model- thank you!

thank you for this absolutely perfect model!

Multi Part Print

Great job on this. Looks great painted.

Full size and 18% scale, painted.

Fantastic model. Had to add some supports to keep his fingers on his left hand from falling off. But looks great!

Absolutely gorgeous in Prusament Mystic Green, initial print at 65%, now printing a larger version. Photo doesn't do the filament justice!

Good model, thx

First try at painting a miniature....

Do. Or do not. There is no try.

Printed in old MG Chemicals Glow in The Dark Green PLA

Great model! Scaled back to 50mm height, printed with supports, 0,12mm layer in PLA, took about 5 hours.

Great model. The green is solid, using Elegoo Clear Green resin. The grey is hollow using Elegoo grey. Awesome model

Love this model! Thank you.

Great model. Turned out really well with paint!

Great model, printed without failures.

It's so cute.. solid model, thanks!

Printed with 3DE silky copper PLA 0.16 mm layerheight

Thanks for model ... Very nicely designed!!!

Thanks for model ... Very nicely designed!!!

My print of Baby Yoda. :-)

Printed with "wood" and stained with water based wood stain.

Great model!! Thanks so much

Great and beautiful design! Fill 15%, Speed 60 mm / s, Layer 0.15 mm, Pla White Printalot Hand painted. Gran y hermoso diseño! Relleno 15%, Velocidad 60 mm/s, Capa 0.15 mm, Pla Blanco Printalot Pintado a mano.

Thank you Christopher, very nice job. Printed on Prusa mk3s, 0.2 nozzle and 0.1 layer height.

Amazing Job! I printed mine using SLA printer :) Here is my Video : https://www.youtube.com/watch?v=o7dVCvaxvPU

Great model, thank you!

Printed at 175% scale, as big as I could go with my printer. Not quite life size. Still deciding about adding more paint detail.

The print actually failed a bit (damn you printer!), but some soldering, sanding and painting fixed it up pretty nicely!

Gracias

Printed in PETG. Came out great! Fingers weren’t the best but I think PLA Would’ve gave better results

Cute :3

Many thanks :-)

Thanks for the sharing, a great model ! I printed mine in PLA https://www.youtube.com/watch?v=bB0q2xZniIM&t=12s

And here it is! The BYA (Baby Yoda Award) for my IBM iX online team contests, during this bad lockdown. Symbol of intelligence, force, rebellion, empathy. Perfect :-) PETG + Copperfill. 35% the original size. Head/hands printed with AA0.25 nozzle (a pain for the small fingers with PETG!).

Love this little guy! Thanks so much!

Printed at 35% the size (5cm tall) with PETG and Copperfill. AA0.25 nozzle for hands/head, quite difficult to find the correct settings for PETG and so small fingers... But... lovely!

cute cute cute

I find it cuter without feet. Mine is about 3" high. Mostly airbrush painted with detail on eyes, face, and claws hand painted. Photos with and without flash.

Sliced with ChopChop3D (https://www.chopchop3d.com) Beautiful model, testing brittle supports settings More on my instagram account @chopchop3d

Lovely model, thanks ;) Printed at 150%, took a while but worth it!

Thanks, really like this model. Printed on prusa mk3s and just a normal white PLA, took 5:50 hours.

My baby

Nice model! Adding this Darth Grogu to the mix.

Love this little guy. Painted.

Cute

I printed the split version using silver PLA from AzureFilm. I had to separately print the hands (I used a little quantity of Galaxy Silver PLA from Prusa I still had (they are quite the same color), because hands need a lower speed. Layer height 0.15mm. Great model!

Elegoo Mars 2 Pro - Quanton3d Resin

Thanks a lot!!! It's a present for my daughter, and thanks to you now I'm a hero for her.

Mashup with a stormtrooper helmet

merci pour ce modèle très sympathique .

Wife wanted this one painted for her work desk. Great file!

Great job on the model. Enjoyed painting it.