Proto Pasta HTPLA v3

WanHao Duplicator i3 V2.1 Nozzle - 0.4mm Nozzle Temp - 215 Deg C / Bed Temp - 60 Deg C Material - WanHao Transparent PLA Printed in Single Perimeter SpiralVase Mode

Adjusted the scale slightly in a couple of the axis - lovely print even in a single colour...

Turned out great. I used silk Jade pla. Ender 5 printer

Print turned out great. S3D slicer. Silk Jade filament. Ender 5 printer

printed with eSun PLA+ - 0.2mm layer height - 3 walls

Devin, this is one of your best vase creations. This filament is superb for this... https://www.amazon.com/gp/product/B07NV4RP62/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Devin, I brought this into my Ender 3 Pro, sliced it with Cura with spiralize, moved it up to 175% and it is showroom perfect with this Silk Gold filament. This is one of your best vase creations. Thank you! Steve 3DV.net - 3D Virgins

Scaled 150% X and Y (left Z at 100%), and printed in Vase mode on Ender-3 with Cura using SunLu Clear PETG at 0.12mm

I've made a timelapse and featured this design in this video: https://youtu.be/mcn9nz9pGG0

I've created a timelapse and featured the design in this video: https://youtu.be/mcn9nz9pGG0

Loved the design of this one!

Really great print for Vase Mode on the Artillery Sidewinder X1! Printed with Jake3D_Official Glitter Green ECOPLA and it took about 10 hours. I scaled the X and Y axis up 150% and then scaled the Z axis up 125% so the shaping is a little different than the original file, but the slicer took care of the adjustments perfectly!