AEPHAR01A - Pharaoh 1 Traditional Floors
$8.00 AEPHAR01A - Pharaoh 1 Traditional Floors
3D
Published 2021-02-10T10:07:29+00:00
Stop me if you've heard this one before: We took this old set, we updated it to OpenLOCK, we added requests, then we added stuff we wanted for our own games. Then we did it all over again on a 2nd floor style that matches the pyramids set released last year. Finally, we ended up making so much stuff that we had to split the set and still it wasn't enough. We had a few overflow models that will have to be pushed to a later set with open space.
Pharaoh is one of our oldest sets. We love this style, we love making these tiles. We love your requests and we love you, too. Because, if you are reading this, you are probably a fan or well on the way.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 10/02/2021 |
| Price | $8.00 |
| Support Free | YES |
Mummies and Tigers and Bears OH MY! Peter Short is the amazing painter behind these sets.