Ball Python Snake Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
$3.98 Ball Python Snake Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
3D
Published 2022-10-28T21:50:56+00:00
I'm very excited to share my articulated Ball Python Snake. This is a hefty fellow. The base length is 24 inches, BUT that's just the starting point! With a new snap-fit body joint system and the additional Body Extension Links, you can make it as long as you want! Each Extend Link adds another inch to the total length. Try different colors to add a striped effect. There are no limits! How long will you make yours?!
Updated... Basic Multicolor 3mf file included for eye and snout coloring.
This model is Pre-Supported *(no added supports required).*
Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body (demo'd on the Leopard Gecko): https://youtu.be/IIBjZ6EOQGE
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Includes 7 files:
Recommended:
- Head with Custom Support: Snap-Fit To BodyFront. A small disposable support is pre-built into the model. ***No Additional Supports Needed***
- Body Front: Print-in-Place. Snap-Fit To BodyRear.
- Body Rear: Print-in-Place. Snap-Fit To BodyFront.
- Body Extend Link: Print-in-Place. Fits in between BodyFront and BodyRear. Each Extension adds 1" in length. Print as many as you want!
Extras:
- Body Front Aligned: Print-in-Place. Snap-Fit To BodyRear. Straight aligned layout for large format Printers or Belt Printers.
- Body Rear Aligned: Print-in-Place. Snap-Fit To BodyFront. Straight aligned layout for large format Printers or Belt Printers.
*Good bed adhesion is a must for successful printing. If you have bed adhesion trouble, I suggest a brim. I use a 0.25mm Brim Gap to make removal easier.
- 5%-15% Infill.
- 3 Walls.
This model has been successfully printed down to 70%. Below that the joint function may start to become compromised. YMMV
| Date published | 28/10/2022 |
| Price | $3.98 |
| Technology | FDM |
| Support Free | YES |
Some shots in this beautiful strong hero 3d rainbow PLA for my Etsy shop!