Barbarian Tankard & Vault Set
Barbarian Tankard & Vault Set
3D
Published 2025-04-01T23:54:36+00:00
Only FatesEnd Merchants with an active License may print & Sell FatesEnd items.
🔗 MMF: bit.ly/FatesEndTribe
🔗 PATREON: bit.ly/FatesEndPatreon
While you're at it, check out Furhaven: bit.ly/FurhavenGame
════════════════════════════════════
Forged for the wild-hearted and reckless, this tankard looks like it’s been through as many battles as its owner. Dent it, drop it, rage with it—this beast of a tankard can take it. The matching vault? It’s where you store your dice when you’re too busy yelling your battle cry.
════════════════════════════════════
These Tankards are designed to work with 27.5mm D20s and smaller.
Tray First Use Tip:
Carefully insert the tray from the bottom of the tankard. Make sure the tray rails are aligned properly to avoid sticking or breakage.
Additional Trays & Tankards can be found here: https://www.myminifactory.com/users/FatesEnd?show=store
*Please review included _ReadMe.txt file for print recommendations & details.
(Print at 0.12mm layer height if you are having a hard time getting the tray to slide nicely!)
Our models are designed to be support-free for easy FDM printing—no supports needed!
- Layer Height: 0.2mm for standard prints, 0.12mm for finer details (enable Z-hop for delicate prints)
- Wall Loops: 3-4 for strength and durability
- Infill: 6-8% using gyroid pattern for optimal strength and efficiency
- Supports: Not needed! Our models are crafted for hassle-free printing
- Bed Adhesion: A well-leveled bed is usually enough, but a brim can help for extra stability
If you run into any issues or need advice, feel free to reach out! We love seeing your prints—share them with us using #FatesEnd!
| Date published | 01/04/2025 |
| Support Free | YES |
Printed on a Creality Ender 3 S1 with a layer height of 100 microns. Filament was Kingroon PLA Silk Gold.