Concretium titan defense wall - plateaus
$20.00 Concretium titan defense wall - plateaus
3D
Published 2025-07-17T19:14:19+00:00
update 10.02.2026: The object CTW_wall_corner_225degrees_half_roof_final was the same as the object CTW_wall_corner_135degrees_half_roof_final. The correct object has been uploaded in its own zip-file. You can download and select the file CTW_wall_corner_225degrees_half_roof_260210_final.stl.zip by using the download button. I'm sorry for the inconvenience. Have fun printing.
The "concretium titan defense wall" is a highly modular kit to build a defensive system on your battlefield that can withhold the destructive power of a titan. The set can be used on its own, but offers full compatibility to the „concretion tile sets“ and the „concretium fortifications“. You can include the walls into your battlefield using the included tiles, or if you wish so, you can build them completely without the tiles.
The set „concretium titan defense walls - plateaus“ is an extremely flexible set that allows you to build an impressive fortification. All wall sections are one-sided which means, you can build all the different walls of the set „concretium titan defense wall - two sided walls“ by printing and connecting 2 (or more) corresponding walls. This increases the flexibility of this set for the cost of a slightly higher print time and material cost. The biggest advantage is, that it allows you to build higher plateaus. You can build „smaller“ fortresses or even a full table with deep digs between the plateaus, it’s all up to your imagination.
Add the „concretium titan defense walls - gate“ and the „concretium fortifications“ and you can reenact the siege of terra.
Content:
- 8 different wall sections with some additional designs to field bigger gun turrets
- 3 ramped gate sections with different widths, compatible with the „concretium titan defense walls - gate“
- optional parts like weapon systems or different ornaments
- all tiles and frames needed to use the plateaus with the concretium tile sets
- 3 tiles to add diagonal roads on ground-level
- 6 tiles to add diagonal roads on plateau-level
- 1x pdf spreadsheet with building and printing instructions
All parts are optimized to print supportfree with FDM.
printed with: anycubic Kobra 2plus, sliced with Prusa 2.7.1
layerheight: 0.1mm
perimeters:2
perimeter generator: Arachne (this helps to print thin vertical elements)
perimeter speed: 60mm/s
bottom layers: 3
top layers: 4
Infill: 8%
ironing is activated for all surfaces: flowrate 25%, distance between ironing paths 0,15mm, ironing speed 65mm/s
and Bambulabs A1, sliced with Bambu Studio 2.1.1
o.12mm High Quality @BBL A1 settings with ironing activated
| Date published | 17/07/2025 |
| Price | $20.00 |
| Support Free | YES |
Shown with separate defense walls and other buildings from the Lumos range (not included with this file set). Footprint is roughly 26" square. Going to be a great centerpiece for our upcoming campaign games! Though I do wish my question about the corners would be addressed...