Flexi Factory Skeleton Saber Tooth Tiger with 3MF Included!
$4.49 Flexi Factory Skeleton Saber Tooth Tiger with 3MF Included!
3D
Published 2025-06-25T15:04:02+00:00
ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.
To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:
https://linktr.ee/flexifactory
Please help support the creative work of each 3D artist and NEVER share or sell a digital file.
3D model description
This is one that my wife has been requesting for over a year! I was stumped by those Giant Teeth and having the mouth open and close was a non- negotiable for her 🤣
I'm excited I was able to tackle both those obstacles with this design, and SHE said I nailed it hahaha.
I included the stand and a couple of bones which really showcases it's catlike prowess... RAWR
Included are 7 files:
*Skeleton SB Tiger_Body
*Skeleton SB Tiger_Head_With Eyes
*Skeleton SB Tiger_Head_No Eyes
*Bone A
*Bone B
*Skeleton SB Tiger_Stand
*Skeleton SB Tiger.3mf (colored Bambu/Prusa file)
Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!
Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.
Please feel free to share images of your prints on this page, I would love to see 'em.
Thank you.
P.S. If you like this design, Check out my other models. https://www.myminifactory.com/users/FlexiFactory
Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory
*As an Amazon Associate I earn from qualifying purchases.
Â
-
Eye and NO Eye versions included
-
STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
-
I print with, 15% infill/gyroid, .12 or .16 layer height for quality.
-
As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.
-
I successfully test printed between 50% and 150% for this one.
-
Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory
| Date published | 25/06/2025 |
| Price | $4.49 |
| Support Free | YES |