Hammerhead Shark Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
$3.98 Hammerhead Shark Articulated Toy, Print-In-Place Body, Snap-Fit Head, Cute Flexi
3D
Published 2022-12-02T17:50:35+00:00
Introducing the articulated Hammerhead Shark! I've always loved the odd, alien-like, look of the hammerheads, and had a blast designing this grumpy fellow. I hope you enjoy!
Updated... Multicolor 3MF now included!
This model is Pre-Supported (no added supports required). You can even use the removed head supports as mini-stands to balance the shark on for a little extra posing option. (it takes a bit of balancing.)
Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body (demo'd on the Leopard Gecko): https://youtu.be/IIBjZ6EOQGE
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Includes 4 files:
- Body: Print-in-Place.
- Head with custom Pre-Support: Supports are built into the model. Snap them off when complete. ***No Additional Supports Needed.*** Use the snapped off Eye support wedges as mini-stand to balance the model upright (see image gallery)
-Multicolor 3MF Now Included: Compatible with both PrusaSlicer and Bambu Studio.
-Head bare: includes an unsupported version of the head in case anyone prefers it, but ***I highly recommend using the pre-supported head***
*Good bed adhesion is a must for successful printing. If you have bed adhesion trouble, I suggest a brim. I use a 0.25mm Brim Gap to make removal easier.
- 5%-15% Infill.
- 3 Walls.
This model has been successfully printed down to 65%. Below that the joint function may start to become compromised. YMMV
| Date published | 02/12/2022 |
| Price | $3.98 |
| Support Free | YES |
Hammerhead 15" Printed at 150%