Modular Fortress
$18.00 Modular Fortress
3D
Published 2023-06-07T18:06:47+00:00
Full modular fortress! With these models you can build the fortress the size you need. The pieces are attached with clips or magnets to be able to replace the sections easily. In addition, with the sections in ruins you will be able to make only parts of fortresses in ruins, or destroy the fortress throughout the game. In addition, you have three interchangeable banners!
All models that need to be attached to others have slots for our own clips for easy mounting, so you won't need to glue any parts and these will be easier to store. All models were printed in a standar sized printer 20x20 cm base with no supports.
https://www.patreon.com/makersanvilstudio
Also, you can follow us on Instagram where we will be uploading photos of our newest content and you can see the entire set of pieces, avaliable for all our patreons!!
https://www.instagram.com/makersanvil/
*STL files are for personal use only
| Date published | 07/06/2023 |
| Price | $18.00 |
| Support Free | YES |
I printed these on my Elegoo Saturn 3 (MMF doe snot list Elegoo Saturn 3 any longer...) with 100% size. I just encountered that aprox 95% would be better when I start the Corner towers, since the towers fill out the printing plate fully and I accepted the fact on two sides approx 5mm are gonna be missing. The gate is really tight, I printed it therefor only 95% of the sice but had to do a little bit of filing afterwards. Via chitubox I hollowed it with 2mm wall thickness and standard stiffening 10% grid. On the bottom I put 2 to 3 holes with diameter 6mm so the excess resin could flow out. Printing medium Anycubic ABS-Like Resin V2 (water-wash). Printing temperature between 20 and 25°C. No misprints. Longest single pirnt took approx. 8 hours. I printed directly on the printing plate with no additional supper (except the gate), it went out fine. Great addition would be another tower with entrances on opposite sides, unfortunately creator does not reply.